PaulMc

[PaulMc]

Hi can any one help? My Terrano 2.7TD has a few probs .1 the gear stick goes in to all gears but it is as remote as a VW camper van any ideas? 2.The car sits about 2 inches lower in. N.S.front. I hope this is fixable by adjusting the torsion bar? I have just bought a service manual ,but that appears to tell me every thing accept what I need to know.Can any one help me please ?:

 

[PaulMc]

Hi can any one help? My Terrano 2.7TD has a few probs .1 the gear stick goes in to all gears but it is as remote as a VW camper van any ideas? 2.The car sits about 2 inches lower in. N.S.front. I hope this is fixable by adjusting the torsion bar? I have just bought a service manual ,but that appears to tell me every thing accept what I need to know.Can any one help me please ?:

I have not said anything about myself as l do not want to bore anyone .However I am not trying to hide any thing and am willing to answer any of your questions accept about paternity! Thanks again kind regards Paul Mc

 

[firebobby]

My Terry had sloppy gear stick when I got it, I bought a new nylon bush and fitted it, it is better now. Check the down load section and you will find it under changing bush at bottom of gear stick.

 

[rustic]

My Terry had sloppy gear stick when I got it, I bought a new nylon bush and fitted it, it is better now. Check the down load section and you will find it under changing bush at bottom of gear stick.

Hi welcome to the club.
See
http://www.nissan4x4ownersclub.com/downloads/workshop/wk38.pdf

Your joining fee has covered the first fix lol...
:thumb2

 

[jims-terrano]

Welcome aboard, shame you bought a manual as theres a link in the downloads section. Go to quick links and see the downloads section as theres loads of info in there.
Theres been several threads regarding the torsion bars and chances are yes all you need to do is reindex them both. Some detailed explanations knocking around on here and might even be some info in the downloads section too.

 

[AlexD333]

Howdy and welcome, find a flat surface and measure bottom of front wheels to arches both sides same style and see the difference. :thumb2