Patrol Pedders suspension kit and 35" wheels and tyres

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mr K

Well-known member
Joined
Mar 4, 2015
Messages
1,145
I'm selling my suspension set up and 16" steel wheels with 35" Maxxis Creepy crawler tyres.

Suspension is a Pedders 2 inch lift kit with long travel foam cell shocks and also Pedders steering damper. So 4 springs, heavy duty up front, standard in rear and 4 long travel shocks and a steering damper also. I'm not quite sure about the fitment of the steering damper to other trucks though thats the only thing as some had different mounts. Kit is in brilliant condition though, still fully coated in red paint which will confirm its condition.

Also black steel wheels, 16 inch with a -35 offset and 35x12.50x16 Maxxis Creepy crawlers. These tyres must have only done about 350 to 400 miles max and are also in great condition, wheels also have £100+ worth of balancing beads in them.

Pictures can be seen from my build thread here:http://www.nissan4x4ownersclub.com/forum/showthread.php?t=26453

Probably looking at something like £500 suspension and £500 wheels and tyres. Both are located in Stoke-on-Trent at the moment and replacements will be going on but until they come off obviously I can't release them, just getting feelers at the moment really but they are definitely for sale.
 
I'm not sure if I'm going to go above 33s on the Y60 bud or I would have been interested in the 35s.

What you replacing the existing lift with? Bigger? :naughty

Re the steering damper yours should be fit Y60s and most y61s pre around 2003
 
Awesome price.

I was also looking into 35's for the future.... :augie
 
Hi K
Sorry to hear your selling these, i'm sure you have your reasons.

I'm certainly seriously interested in the suspension!

1. To allow for the long travel shocks, did you have a body lift to?
2. You mentioned spring spacers in the build thread, are the springs not +2" ?
 
I want the suspension as well, for my 2002 GR.

Brian :)
 
Hi K
Sorry to hear your selling these, i'm sure you have your reasons.

I'm certainly seriously interested in the suspension!

1. To allow for the long travel shocks, did you have a body lift to?
2. You mentioned spring spacers in the build thread, are the springs not +2" ?

No need to lift the body for the long travel shocks.

The springs will be +2" and I assume the spaces give a little more lift again.
 
Hi K
Sorry to hear your selling these, i'm sure you have your reasons.

I'm certainly seriously interested in the suspension!

1. To allow for the long travel shocks, did you have a body lift to?
2. You mentioned spring spacers in the build thread, are the springs not +2" ?

Hi Davey, don't worry I'm upgrading :naughty

Jay is right, the long travel shocks are 4 inch shocks and are part of this kit and go with the 2 inch springs, no body lift is needed, these were specced by pedders.

The spring spacers were just there to give a little bit more lift but I've decided to do it properly now to go with the new engine
 
Hi Davey, don't worry I'm upgrading :naughty
The spring spacers were just there to give a little bit more lift but I've decided to do it properly now to go with the new engine

The new engine you say...:nenau
 
See build thread, headgasket went so he's fitting a skyline engine :naughty
 
Going the other way?
122435.jpg
 
Er ditto...... new engine??

The head cracked and I had a lot of niggles with it so that was it.

In it's place is now an r34 Skyline RB25 det neo.

I know of only one other rb25 in a Patrol and that's an r33 in an ultra4 race truck. This might be the only r34 Patrol in the country.
 
I love stuff that's different....
This is different... well done Bud!
:thumbs
 
Yeah, I'm really looking forward to seeing it!

I'd love to do an engine swap.... But it's a bit beyond me!
 
mmmm this sounds most scrummy :D
I've just agreed the sale of the Black Pearl so my Trol is approaching the shed sooner than expected :naughty
I'll finish my supercharger mods first and then OM606 is looming.
I have the Pedders +2 set up and can vouch for it's lovelyness.
Trol on 35s just looks normal. I've got 37s ready to go on the project though :cool:
 
Sounds good Pete, will you hopefully have it setup by the start of next year?
 

Latest posts

Back
Top