NDS 1 For Android

[Mav96]

Came across NDS 1 for Android, I have just tried the Lite version & it works with my phone (Galaxy Note II) going to try with my cheap tablet soon. its very basic but handy I think. I did have a couple of old error codes & it read them fine & also reset :thumbs I used the usb connector I got for EcuTalk & a usb adapter I have for my phone see pics. I dont have a working bluetooth connector for the mav yet so unable to test the bluetooth connection as this would be much better.
Phone screenshots

Adapters

 

[makeitfit]

Looks cool :thumbs

 

[Thomas-the-Terrano2]

hi, where do we find this as all i see is nintendo references?

 

[makeitfit]

Here you go https://www.google.co.uk/url?sa=t&r...4YHwBA&usg=AFQjCNG4lAAa-su0CCfznVe0jYumz0r9ag

 

[terrano bob]

Here you go https://www.google.co.uk/url?sa=t&r...4YHwBA&usg=AFQjCNG4lAAa-su0CCfznVe0jYumz0r9ag

:clap :thumbs

 

[despot67]

wouyld this connect to my 03 plate terrano?

just found the connector on eblag for 20 notes and if it gives this level of detail it would be handy?

 

[Mav96]

There are different versions for OBD1 & OBD2 so I assume you have the 16 pin socket ? once you have the cables or bluetooth try the free version first, not all android devices will work but worth a try for its simplicity :thumbs

 

[bry]

Came across NDS 1 for Android, I have just tried the Lite version & it works with my phone (Galaxy Note II) going to try with my cheap tablet soon. its very basic but handy I think. I did have a couple of old error codes & it read them fine & also reset :thumbs I used the usb connector I got for EcuTalk & a usb adapter I have for my phone see pics. I dont have a working bluetooth connector for the mav yet so unable to test the bluetooth connection as this would be much better.
Phone screenshots

Adapters

Now on the play store is NDS 2 Lite(free).Have you tried Bluefrom,i shall be having a play around with these programs this weekend.

 

[Banshee]

wouyld this connect to my 03 plate terrano?

just found the connector on eblag for 20 notes and if it gives this level of detail it would be handy?

No, hang in there

Yours is 16 Pin same as mine

Myself and RayF are trying to get this working atm

 

[Mav96]

on the play store there are versions for 14 pin & 16 pin sockets free trial & full programs, you just need the right adapters, hardware setup. as far as bluetooth go's I will make the modified adapter as described on their web site (when i got some spare cash :doh)

 

[bry]

I have only done a little research,on the 14 pin.But i have the same reader as you.And i have just received my micro usb adapter.So hoping to check this and other software,this weekend.Brian...

 

[Mav96]

only just realized I you can convert the 14pin usb adapter to bluetooth via an add in bluetooth board so have ordered 1 from the bay. I will report back when I have done the conversion.

Note if you have the 16 pin socket you just need to purchase a 16 pin bluetooth adapter as shown on the web site http://www.nissandatascan.com/ much simpler

 

[Banshee]

only just realized I you can convert the 14pin usb adapter to bluetooth via an add in bluetooth board so have ordered 1 from the bay. I will report back when I have done the conversion.

Note if you have the 16 pin socket you just need to purchase a 16 pin bluetooth adapter as shown on the web site http://www.nissandatascan.com/ much simpler

I'm after a 16 Pin one non Bluetooth for use with ECUTalk

Me and Ray are struggling with this one

 

[Mav96]

I'm after a 16 Pin one non Bluetooth for use with ECUTalk

Me and Ray are struggling with this one

dont know if this woul work http://goo.gl/WBZcUn :nenau

 

[Banshee]

dont know if this woul work http://goo.gl/WBZcUn :nenau

Don't think it will mate as that will only work on the EOBD interface whereas I want to use Consult II

Thanks though

 

[Mav96]

Got the bluetooth module today, soldered into adapter, works great

Screenshots