Loz
Well-known member
- Joined
- Jul 19, 2009
- Messages
- 185
This little beastie is a Talon 100R or more commonly known as a Rover 100 with a big engine . It was Built by Talon Sports Cars for little old me. She's my daily drive & good for scaring the pants of much more expensive kit!
Next year I plan to take the car hillclimbing which why I'm saving for a commercial Terrano to use as a tow car, daily hack & maybe some green lane-ing if I can find the time!
The Specs as far as I can remember.
Fully stripped interior & ally door cards (side impact bars removed from doors)
1.8 VVC K series engine from MGF.
PG1 gear box with Type C gear set & Quaife LSD
BMC CDA Air box & filter.
GTI discs & callipers.
Welded in roll cage.
Perspex rear 1/4 & boot windows.
Individulaised & lowered suspension.
GTI spec ARB's & Dampers.
MG TF leather seats.
Securon 3 point harness with lockable retractors at the rear.
Kn 14" Dytec Alloy wheels 195 tyres.
A set of 13 GTI wheels with R888 tyres for track days.
Fibreglass bonnet.
Planned work includes polybushing the suspension, fitting a fibreglass boot lid, bucket seats & full harnesess plus various other small jobs to bring in line with MSA rules for Hillclimbing. Frankly I cant wait!
All I have to do now is try not to 'fettle' the Terrano when I get it (eventually). :lol
Loz. :thumbs
Next year I plan to take the car hillclimbing which why I'm saving for a commercial Terrano to use as a tow car, daily hack & maybe some green lane-ing if I can find the time!
The Specs as far as I can remember.
Fully stripped interior & ally door cards (side impact bars removed from doors)
1.8 VVC K series engine from MGF.
PG1 gear box with Type C gear set & Quaife LSD
BMC CDA Air box & filter.
GTI discs & callipers.
Welded in roll cage.
Perspex rear 1/4 & boot windows.
Individulaised & lowered suspension.
GTI spec ARB's & Dampers.
MG TF leather seats.
Securon 3 point harness with lockable retractors at the rear.
Kn 14" Dytec Alloy wheels 195 tyres.
A set of 13 GTI wheels with R888 tyres for track days.
Fibreglass bonnet.
<embed type="application/x-shockwave-flash" wmode="transparent" src="http://w312.photobucket.com/pbwidget.swf?pbwurl=http://w312.photobucket.com/albums/ll326/piscisvisio/b8c14fe1.pbw" height="360" width="360">
Planned work includes polybushing the suspension, fitting a fibreglass boot lid, bucket seats & full harnesess plus various other small jobs to bring in line with MSA rules for Hillclimbing. Frankly I cant wait!
All I have to do now is try not to 'fettle' the Terrano when I get it (eventually). :lol
Loz. :thumbs