- Joined
- Dec 25, 2009
- Messages
- 17,416
Started the day at 08.30, Eastbourne at 9 for a leaky ball valve, after sourcing new B V and fitting left at 10.30 to another Eastbourne job this time Solar, system at 0 pressure, topped up with antifreeze to 1.5 bar, system working, no sign of leaks, left at 11.30 to go to another at Polegate, system pressure low, again topped up and no sign of leaks but low sensor seems too high so moved it to side of cylinder which is a better place, left here at 12.45 to next job in East Grinstead again low pressure but this time found a small leak at pump, now this lady had suspected a leak at this point and placed tissue under but remained dry, on removing the pipe insulation discovered that it was wet, so the leak was small and over 6 months or so had leaked enough to stop the system from operating and all the liquids had evaporated, so sorted the leak and left at 3 pm, next job is in Ashford not an easy route from here, and every town you pass has congestion problems eventually arived at 10 past 6,replaced broken tube, no problem but when to top up the spindle on the valve decides to leak, frantic have I got a replacement? Yes fourtuneately, so top up and job done, left at 7pm home at 8 pm, not bad 5 jobs and 140 mile round trip, but could not do it every day, aside from the fact I had to get up to early to get my oats, very bad news, just a day in Rick's life, hope you all enjoyed it, if not say and I will refrain, Rick