mud tyres

[daniel2609]

Set of 5 nexen roadian MT mud tyres for sale. 31 x 10.5 R15. Loads of life left in all of them. The tyre on the steel rim has never been on the road, the wheels are off of a Nissan Terrano 15 x 7J 25. May fit others. £400 Ono collection melksham, wilts or I can deliver at 50p per mile

 

[daniel2609]

bump:nenau

 

[daniel2609]

going on ebay next week

 

[AlexD333]

Get a tread depth gauge to read remaining tread, that's what if do if I were coming to inspect em :thumb2

 

[panelbeater]

do 31 10.5 fit straight on a standard t2,ie no arch/sill bashing.

 

[Fez_uk]

do 31 10.5 fit straight on a standard t2,ie no arch/sill bashing.

no

.

 

[Banshee]

I fitted 31 10.50 R15 BFGOodrich AT's to my standard 15" maverick Alloys and had terrible rubbing, you'll have to get the hammer out!!!!

 

[daniel2609]

my truck had been lifted back to original height on the front with no lift on the rear, and these ran fine with no rubbing

 

[Banshee]

my truck had been lifted back to original height on the front with no lift on the rear, and these ran fine with no rubbing

I don't know how you managed that

 

[Fez_uk]

They probably measured way under 31", As some tyres marked as 31s can be as little as 29.5 - 30"

 

[Banshee]

They probably measured way under 31", As some tyres marked as 31s can be as little as 29.5 - 30"

Well I've measured my BFGoodrich's and they are def 31"

 

[daniel2609]

£350

 

[elty001]

do 31 10.5 fit straight on a standard t2,ie no arch/sill bashing.

Will be fine on the rear but depends on the off set of the wheel as to how bad they rub on the front.
My first set of 31x10.5 maxxis mud tyres only needed a bit trimming off the front mud flaps, but when I put them on a wheel with a bigger off set I had to trim a bit of the front bumper and hammer the seam on the inner wing flat.

 

[daniel2609]

Will be fine on the rear but depends on the off set of the wheel as to how bad they rub on the front.
My first set of 31x10.5 maxxis mud tyres only needed a bit trimming off the front mud flaps, but when I put them on a wheel with a bigger off set I had to trim a bit of the front bumper and hammer the seam on the inner wing flat.

had no rubbing at all on mine with these

 

[daniel2609]

£325

 

[daniel2609]

300

 

[daniel2609]

£250

 

[daniel2609]

Sold! Sold! Sold!