Much debated stereo conversion!

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

grove

Active member
Joined
Sep 24, 2005
Messages
31
I am just about to change my 04 double din stereo for an after market unit and have the fascia plate adaptor and hazard switch but need the switch harness extension.

Does anyone know whether this harness is available from a source other than a Nissan dealer? my local dealer is struggling to identify whats needed (awkward or stupid?)

Any help appreciated.


Grove
 
where did you get the adapter from? I have been trying to get one cheap for ages - dealers quoted nearly £100 for switch and fascia
 
Have you removed the old stereo yet to have a look at the wire's?
When I replaced my double-din for a standard one I didnt need any switch harness extension????? :confused: :nenau
Just unpluged the hazzard wire out of the old radio, and into the new blanking plate/switch?

Zippy - £100 for the plate :eek:

I got a 'blanking plate' from the main dealers in Leeds, it was a few years ago, but sure it was only around £30ish including the hazzard switch! Then just carefully cut round the hole with a stanley knife to remove the plastic blanking 'thingy' they put over the slot! :thumbs
 
Thanks Big Black and Zippy for the comments.

I bought the fascia adaptor from a Nissan dealer, part number 68470-0X800 at todays price of £35-34 + vat. This includes the fascia adaptor and blanking plate but not switches.

The dealer was quoting £69 + vat? for a hazard switch. I bought one from Ebay part No. 25290-0F000 for a fiver which fits the fascia adaptor but has more clearance around the apperture than I would like.

Big Black thanks for the comment on the harness, this perhaps explains why the dealer couldn't find a part number. I will check when I change the unit over next week.

Thanks all for your help.

Regards
Grove
 
Good and bad news!

Big black you were right the existing harness is long enough but I have the wrong switch as the harness plug does not fit the switch.

Does anybody have a part number for the switch used in the fascia blanking plate?

Regards
Grove
 
hazzard switch etc

--------------------------------------------------------------------------------

okay I'm reposting this as I think its what your after..

Part No Description Price
28268AV600 SWITCH ASSY-REM £62.31
252909F500 SWITCH ASSY-HAZ £22.80



the above parts are from a nissan dealer in Northern Ireland
Derek Loane Motors Ltd
02885557263
if your really stuck i'm sure they could arrange postage or tell you where to get them locally

Hope it helps,:thumb2

Bill
 

Latest posts

Back
Top