Manual hubs

[Greenchef]

Hi all, I've been having ongoing problems with my auto hubs so thought it was high time to change them out for manuals.
So shiny new manuals arrived (milners say they don't fit y60 GR) mines a y60 safari import so should be fine?) am I right?
Start to try to fit them from the work shop manual and realise I need a spacer and bush. Problem is that the hub should still slide up even without the spacer and bush, it will only slide in about 3 mm leaving 5 mm gap.
Any ideas?
Was thinking I may need to cut my losses and buy some AVM hubs instead I believe they come with all necessary bits to fit!

Cheers in advance for any advice.

 

[Greenchef]

So Milner hubs didn't fit. Got AVM hubs instead, fitted in less than half an hour and cheeper than milners. (From Ks international)
I have one working auto hub available if any one is interested, happy to let forum members have it for carriage, otherwise will eBay it!

 

[Kamsin]

Glad to see you got it sorted out.

What was wrong with the auto hubs? mine never worked till i stripped them down and fixed them. Id be happy to take them off your hand if you dont need them, they will alway do for spares.

 

[Greenchef]

Ones as good as gold, the other total shredded inside if you can rebuild it your welcome to! Way beyond my very limited abilities! Pm me your detail I'm in Oxfordshire so may be to far to collect!

 

[(RIP) PLANK]

Just to clarify! Are these Y60 hubs? I did read but didn't comment as I have no experience of a Y60.

 

[Greenchef]

Yup y60.

 

[Kamsin]

Arrr, Also my Bad, im reading wrong thread. I have 2 terranos so they no use to me i dont think. Better to let them go to someone else that can use them. :doh