Living with the T2

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
defo oil, level is now at normal, no warning light, on the top lip of the filter, there is a bit of oil? will give it a dip then a drive tomorrow.
 
dsgrnmcm said:
20 min to fit!

Sounds diffrent, feels a bit more pokey (could just be me)

But will give results after a long run!
Click to expand...


sounds very diffrent :)
i think it pulls away a bit better, i get some tyre squeek now, didnt before so got to slow down a little :augie

will be nice a relaxed then work out mpg over a few tank fulls, see whats happend there..
 
zippy656 said:
sounds very diffrent :)
i think it pulls away a bit better, i get some tyre squeek now, didnt before so got to slow down a little :augie

will be nice a relaxed then work out mpg over a few tank fulls, see whats happend there..
Click to expand...

Comrade Zippy, us macho geezers call it TYRE SQUEAL! Givin it large down the pub, telling the lads you pulled a massive wheelie with loads of tyre squeak doesn't really do it for me :lol:lol:lol
 
but it is a squeak!

only squeal i get is from the kids in the back!
 
zippy656 said:
but it is a squeak!

only squeal i get is from the kids in the back!
Click to expand...

LOL!

still, good news that it feels better....I feel vindicated after harping on about these things for so long! Just wait til you get your mpg figures; if you don't get at least +2mpg after you've stopped using the extra power(!!), I'll eat my hat!
 
yep, was talking about that this very morning...

i won the race though, the other guy lost his nerve on the round about..
 
Nah, I get the back squealing like a little piggy on the roundabouts:sly
You should see the old biddies run for it in tesco:augie
Just a little friction from the LSD in car parks is a jolly:cool:
 
oil leak.

Driftig a t2. seen a lwb pajero do it on you tube, I the rain though.

Well my oil filter was pretty loose, so used some hand towels for grip ad tightened it, and ideas as to why its comig undone? should I use a filter tool (non chain) to tighten it?
 
Down the beach!

IMAGE_193.jpg

Down the beach for a 4x4 drive test!

well it certanly feels diffrent in 4wd high, tighter, and you can tell when it drops back in to 2wd, just waiting for the wales-a-thon, i'm on leave the whole of augast and poping up to see one of my welsh mates (his name is taff, do you know him...) so will try and arrange to meet the infomas team wales!
 
dsgrnmcm said:
View attachment 561

Down the beach for a 4x4 drive test!

well it certanly feels diffrent in 4wd high, tighter, and you can tell when it drops back in to 2wd, just waiting for the wales-a-thon, i'm on leave the whole of augast and poping up to see one of my welsh mates (his name is taff, do you know him...) so will try and arrange to meet the infomas team wales!
Click to expand...

Looking good! What beach is that - despite being in Devon it looks exactly like Walney Island in Cumbria.
 
That is the northam burrows which is behind the pebble ridge that seperates it from westward ho! beach, Dont know why theres a HO! on there, i've only seen them at night...
 
lacroupade said:
Looking good! What beach is that - despite being in Devon it looks exactly like Walney Island in Cumbria.
Click to expand...


thats because beaches all tend to be made up of pebles and or sand
brick walls have a tendancy to all look similar.....due to the fact they are made of bricks:jump:jump:jump:jump
 
dsgrnmcm said:
Also when I try to shut the sunroof I can never get it shut right, always making that rushing air noise?
Click to expand...

Hi there!!!
Have you tried to regulate the open/close from the adjust bolt? In front of the open/close button is a cover. Remove it and you wiil see an adjustment bolt. Turn that bolt left/right until you figure that the roof closes proper.
 
Roof rails

Got these from the scrappies today £10 for the 2. Came off a N reg 406 estate. bolted from underneath, 1 bolt per section, and the middle slides.

Need some help with removing the lining, and positioning.

I aim to pull the lining down and drill a hole and bolt from below straight up in to the bar's/rails.

Should i seal around the outside of the rails on top?
There is a small/thin rubber between th erack and roof, should i make a thicker one?
roof bar fittings.jpg
 
fittings

fitting.jpg

From the 406, 1 bolt to the frame, 1 up through the roof in to th erail. should i just use 1 bolt straight up in to the? it will only be for fishing rods and a surf board?
 
You must log in or register to reply here.

Latest posts

Back
Top