How to disconnect the alarm

[BLUE]

Is it possible to disconect the alarm and does anyone know where the alarm is situated?:nenau

 

[Kamsin]

Is it possible to disconect the alarm and does anyone know where the alarm is situated?:nenau

I dont think you can on the T2 as NATS 2 runs inside the main CPU. But i stand to be corrected.

 

[R1cho]

the horns for the alarm are in the rear panels as for the actual alarm i have no clue :lol

 

[spiderpig37]

Horn for alarm is in the drivers side rear panel linked mine out so i can use my key to unlock as my key fob is knackered lights still flash until you put key in ignition but alarm doesnt sound

 

[Kamsin]

Horn for alarm is in the drivers side rear panel linked mine out so i can use my key to unlock as my key fob is knackered lights still flash until you put key in ignition but alarm doesnt sound

Mine is the same as this, but he wanted to disconnect the alarm, he did not say horn. I was under the impression it was preventing the truck from starting.:doh

 

[BLUE]

Thank you for your posts, but I want to disconnect the alarm so that the indicators do not flash when I open the car and the only way to stap that is to turn it on.

 

[rayf3262]

Simple way:
Under the bonnet on the O/S is a rubber block that actuates the alarm switch.
If you remove this rubber block the switch will not work.
The alarm will not arm if it "thinks" the bonnet is open.

 

[BLUE]

Thank you, does wht you said :thumbs

 

[Kamsin]

I may do this as well then. :clap

 

[brian0812]

Simple way:
Under the bonnet on the O/S is a rubber block that actuates the alarm switch.
If you remove this rubber block the switch will not work.
The alarm will not arm if it "thinks" the bonnet is open.

maybe this is why my alarm will not flash the lights if i brake in to it ill be looking at this thanks for the info mate :thumbs

 

[rayf3262]

maybe this is why my alarm will not flash the lights if i brake in to it ill be looking at this thanks for the info mate :thumbs

Could be the under bonnet switch, but any faulty door switch could be the cause.

 

[TerraHawk]

Hi,I'm having alarm trouble! My key fob is working fine & I can start the motor, but the hazard lights will not stop flashing.

I unlocked the car just now to unload some bits & as I went into the car the hazard lights started going off. I got out,locked up & started again as if to reset the alarm etc.

Does anybody have any idea what i can do or what is wrong? I can tell you that at the moment my dash cluster is out of the car being repaired if that has any effect?

Thanks for your help.