DEE
Well-known member
- Joined
- Jun 10, 2009
- Messages
- 383
For what it's worth Arthur I don't think the hubs will be faulty, probably the brake rings that are faulty and as previously said they are £50 per side approx. When you become a full member there is a down load regarding striping and cleaning the hubs. Have to say I'm a manual hub fan and they have been fine for me since I fitted them and I'm no mechanic. That said it's still worth throwing a set of brake rings at them. As a full member you'll have full access to the previous postings and you'll find an online manual listed in several posts. My advice become a full member get your head around these hubs via previous posts and then you'll have some good info to go back to the garage if you still feel thaqt's what you want to do.
Jim T
Iam with this one. And i am a macanic. If you dont need 4 wheel drive for a bit take both locking rings out of your hubs plus springs. put them on your shelf and drive that there jeep about for a while. I would like to bet that it would run round perfect no noise at all. If it is quiet its them there hubs. One is us. I say dont let people messsss with your things that dont no what they are doing. most garages just have fitters NOT machanics there is a big diffrence. Hope you get somewhere with them