Heater blower don't blow

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sperko

Well-known member
Joined
Aug 27, 2009
Messages
65
Hi guys
My blower motor has packed up but I put + Feed to the motor and every thing works and befor any bright spark says it Yes i've checked the fuses and there is no supply Is there a relay feeding the fuses ?? if so where is it don't want to start rewiring unless I have to PLEAS HELP GUYS IT GETTING BL--DY COLD IN THE MORNINGS I'm not an autosparky but an electrical service engineer I mend the stuff in garages and petrol stations so I do under stand the tecky talk If any of you guys need help with this type of gear you know where I am:confused
 
Hi guys
My blower motor has packed up but I put + Feed to the motor and every thing works and befor any bright spark says it Yes i've checked the fuses and there is no supply Is there a relay feeding the fuses ?? if so where is it don't want to start rewiring unless I have to PLEAS HELP GUYS IT GETTING BL--DY COLD IN THE MORNINGS I'm not an autosparky but an electrical service engineer I mend the stuff in garages and petrol stations so I do under stand the tecky talk If any of you guys need help with this type of gear you know where I am:confused

well, i had this on my MX6, for me, two things, 1 - blown heater resistor and 2 - the actual switch had blown, had to replace both (the speed selector)
 
Cheers zippy656 there is a relay all I've got do now is find it
 
thats cool, no worries.

ill just say its black.. or gray.. could be green or blue too.
 
zippy I have just been give a disc you could be inerested in from a friend in da motor trade nuge nuge wink wink
 
Blower relay

Blower relay is on the back of the fuse box (inside car left of stering column) remove fuse box to get at it (2 screws) down load zips manual its all on there.


Bob (Hilltop)

ps> Its the bottom left hand relay when when you get the box off
 
Hi guys
My blower motor has packed up but I put + Feed to the motor and every thing works and befor any bright spark says it Yes i've checked the fuses and there is no supply Is there a relay feeding the fuses ?? if so where is it don't want to start rewiring unless I have to PLEAS HELP GUYS IT GETTING BL--DY COLD IN THE MORNINGS I'm not an autosparky but an electrical service engineer I mend the stuff in garages and petrol stations so I do under stand the tecky talk If any of you guys need help with this type of gear you know where I am:confused


if it works on full it will be the resistor,which is down in the passenger footwell under the glove box.an easy fix once you get it out.
 
you get get a dlownload on how to fix it..

but its part of the site you pay your £10 for.. or just buy a new resistor.. ( more than a £10 :)
 

Latest posts

Back
Top