Heated leather not hot

[Terrano]

My heated seat lights work but the seats don't get warm/hot, is there a fix for this, I've tried searching the forum but havn't found anything on them so assume it's not a common fault.
I fixed my flickering distorted speedo lcd today so I'm not afraid to use a soldering iron just need to sort the radio lcd now :doh and both fob's don't work, I found the lock microswitch off on both of them and soldered them back on and tried the method in the quick links page and brand new batteries

 

[firebobby]

My heated seat lights work but the seats don't get warm/hot, is there a fix for this, I've tried searching the forum but havn't found anything on them so assume it's not a common fault.
(

My drivers seat don't heat up much but the passenger side does, not sure what the problem is though

 

[briggie]

have you tried checking the plug / socket under the seat , mine became loose on my bighorn and the light still came on , but seats didnt get hot .... they do now :naughty

 

[firebobby]

have you tried checking the plug / socket under the seat , mine became loose on my bighorn and the light still came on , but seats didnt get hot .... they do now :naughty

Will go and look now Briggie :thumb2

 

[Terrano]

I've just checked the fuse and socket's on the bottom of both seat's and the plug's are on secure and the fuse is in working order, so now it's just a mystery

 

[zippy656]

One works one not, right?

Unplug both

Check resistance on both seats

Also check you have feed to both plugs

If nr me pop along ive my meter at home

 

[Terrano]

Neither seat gets hot in my truck
I'll get round to testing the resistance when I get more time, do you know what it should read at all ?

 

[zippy656]

Nope butim sure some one will

 

[Terrano]

Nope butim sure some one will

They'll be what they are when I test them then , it's only going to be 2 wires so if it comes to it I could run them from the battery/ignition live through a separate relay if I couldn't find the fault.

 

[briggie]

a good idea would be to check you have voltage at the connector

 

[Terrano]

I assume there will only be voltage at the plug with the ignition on and the seat button pressed.