Fuel sender unit

[Steve.Devon]

The return pipe right on the tank on my Terrano 3.0ltr R20 Di has split, does anyone know where I may be able to find one.
Year 2002

 

[makeitfit]

Simply cut a bit of fuel pipe to suite and replace :thumbs

 

[terranosaurusdoug]

The return pipe right on the tank on my Terrano 3.0ltr R20 Di has split, does anyone know where I may be able to find one.
Year 2002

Banshee can advise you on this, I believe he's done one before and has another to do soon.
I replaced mine from front to back with rubber hoses though quite an easy job.

 

[elty001]

I did the same as Doug and replaced from front to back with fuel grade viton rubber hose.:thumb2
Makes it a fix and forget job if done this way:thumb2

 

[Steve.Devon]

Thanks for the advice gents but I have already replaced feed and return pipe the split is on the return pipe into the tank. I manages to stop the leak with a short piece of flex hose and a jubalee clip so it could be moved but it's so close to the bend there's a good chances it will snap with too much vibration and so close to the tank if it does there's too little pipe to fix to.

 

[terranosaurusdoug]

Do you have a picture?

 

[elty001]

Thanks for the advice gents but I have already replaced feed and return pipe the split is on the return pipe into the tank. I manages to stop the leak with a short piece of flex hose and a jubalee clip so it could be moved but it's so close to the bend there's a good chances it will snap with too much vibration and so close to the tank if it does there's too little pipe to fix to.

Ahh i get you now.
Sounds like replacing the whole unit is probably the best way forward.

 

[Banshee]

Swap the Sender Unit

Swap The Fuel Pipes

:splif: :splif: :splif: