engine starting problem

[arthur]

Thanks for your replies I will have a look tomorrow

 

[arthur]

I have found the ignition switch but I can't see a screw does my just pull of?

 

[arthur]

 

[solarman216]

sorry do not know on that model, but doubt it will just pull off, are the wires soldered or on push on connectors, if push on you may see a screw after removing them, Rick

 

[jims-terrano]

If it's like the older trucks then the connector does pull off the switch but will probably have some kind of clip. As ricks says should then see the screw. Main thing is you've identified the switch now. It's so tight for space isn't it.

Good luck

 

[arthur]

I decided to have a pull at the white plastic and it came off turned out to be the socket, as you said there was a philips screw holding the switch it is very hard to get at that screw eventually I manage to remove it I used a philips bit and unscrewed it using my fingers. I have ordered a new switch will pick it up Wednesday. Thanks Jims-terrano and solarman216 for your help

took a photo of removed plug Just getting use to photobucket

Arthur

 

[arthur]

 

[Banshee]

Fantastic news and nice pics, I might make a write up for that if possible, did you take any more pictures?

 

[arthur]

Hi banshee

I didn't take any more pictures. Fitted new switch and starting ok now

Arthur