ecu location on 2002 terrano

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Madmark

Well-known member
Joined
Aug 13, 2014
Messages
1,087
Any idea where it is

I've shoved my head under dash in foot wells but no sign of it so any ideas where please
 
Any idea where it is

I've shoved my head under dash in foot wells but no sign of it so any ideas where please

My 2004 is underneath the centre console behind the handbrake, pop the plastic T shaped piece of plastic out of the cubby hole under the handbrake, release the handbrake, shine a torch in there and see if you can see a silver box with a white sticker on, IIRC it has a big yellow harness going to it and may be secured to the floor with a clamp :nenau
 
My 2004 is underneath the centre console behind the handbrake, pop the plastic T shaped piece of plastic out of the cubby hole under the handbrake, release the handbrake, shine a torch in there and see if you can see a silver box with a white sticker on, IIRC it has a big yellow harness going to it and may be secured to the floor with a clamp :nenau
I think you will find that is the SRS (airbag) ECU....
 
I found it and you have to remove all lower dash glove box and part of centre console will put pics up tomorrow in day light as just fitted tunit box and will put dash back tomorrow. On later ones its between ash tray and lower cubby hole and yes all lower dash does have to come out just to get ecu out so you can count down and up to clamp wires in for tuning box. My ecu is the 130pin type so you dont wanna guess at it
 
Hi there
I'm about to install my tunit box.
I would love to see pictures and an explanation how you did it, what are the results etc...
Cheers jim
 




You can just see ecu top so you have to undo 4 screws and lower ecu out
 
Hi again.
Whoa looks like a lot of work!!
How did the wiring up go?
Can the centre console come out without taking glove boxes out each side?
Jim
 
Hi again.
Whoa looks like a lot of work!!
How did the wiring up go?
Can the centre console come out without taking glove boxes out each side?
Jim

Affraid not as there are bolts behind them to get to to remove centre dash. Tbh an hour and its just screws nothing else. Wiring is fine as only 4 wires your tunit box should come with snap connecters that nip into the ecu wires and then spades slot into them. Just double check you have wires right
 
I have a PSI plug and play (Bosch) box for sale for those of you who don't want to pull the interior apart !!!!
 

Latest posts

Back
Top