Drivers side wing mirror

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

johnb5177

Well-known member
Joined
Sep 11, 2013
Messages
1,586
Well,

Due some careless driving pratt (may his camels never produce young, and his goats forever spawn billies) knocking my wing mirror backwards last night, I require a complete assembly to fit.

Does anyone here have a complete drivers side assembly in black, to fit 2002 T2, that they could sell me....?

If so thats great.

Presuming this is in my little paws, fitting it is the next challenge....do I remove the interior triangular panel inside the door corner, to access the mounting/fitting bolts/screws and wiring?

Answers on a postcard please.......

Many thanks in advance....:thumb2
 
Ive only got a chrome one, nis spec 1st are a specialist Nissan breakers.
Had a few items from them and they are great, really friendly and fast postage, well worth a try.
I did my mirrors on my old one, went to black hence only got chrome now, but as I recall you do just pop off the triangle to access fixings, nice and straight forward.
Good luck
 
They all fit throughout the range though the plug may be different apparently so
I was told on here the colour codes of wires are the same so easy to convert if different plugs. Only real thing to watch out for is sometimes the mirrors get knocked and have a repair job that stops you folding the mirror back.

CNCfabs has been good for parts he’s on here and also uses same name on ebay. Solarman may also have one if you’re lucky too.
 
Well,

Due some careless driving pratt (may his camels never produce young, and his goats forever spawn billies) knocking my wing mirror backwards last night, I require a complete assembly to fit.

Does anyone here have a complete drivers side assembly in black, to fit 2002 T2, that they could sell me....?

If so thats great.

Presuming this is in my little paws, fitting it is the next challenge....do I remove the interior triangular panel inside the door corner, to access the mounting/fitting bolts/screws and wiring?

Answers on a postcard please.......

Many thanks in advance....:thumb2

By the colour black do you mean it is painted black on the panel on the mirror assembly to match the body colour? Some idiot broke my mirror assembly and I changed the whole thing. I can't remember how it a fitted together but fortunately the colour coded panel was okay and I was able to buy a assembly from a different coloured vehicle and swap the panel over. Might make it easier for you if that panel is okay.
 
Hi Guys,

Thank you for all your responses.

Looked on fleabay, and got a clean one to fit @ £50.00

The door card has to be loosened right off, to enable the inside triangle black trim to come out clean, and access the plug/socket for power etc.....fiddly but okay, on the drive dismantled until replacement arrives this week, and fitted.

Thanks again.......:thumb2
 
Just seen this I think I have one in the workshop :(
 

Similar threads

Latest posts

Back
Top