Drivers side footwell full of water

[larson]

i can lend you a grinder but not util monday.. i think your from m62 end of hx, i work that way so not a problem to meet you somewere.

 

[AD Ent]

Ok grinder not needed. just scraped it away....

Before:

After:

I put a bead of silicone just on the seam where it was running down. But it hasn't solved it. On further inspection by pouring a bottle of water over the Brake master thingy/Bulkhead it just poured right into the footwell :doh
So I think the problem is the seam on the Inner Wing to Bulkhead (there isn't one) but I can't get to it with the silicone gun cos it's underneath the big brake servo thingy :doh


Any ideas chaps?

 

[AD Ent]

Anyone know how to get a silicon gun under the brake servo - (that big thing under the wiper left side of engine bay) - I need to put a seal between the inner wing and bulkhead?

 

[trophymick]

You could try a small tube of sealer, toothpaste size.:nenau
polyurethane sealant is best it doesn't, react with steel like silicone does, and it sticks like sticky stuff.:thumbs

 

[AD Ent]

You could try a small tube of sealer, toothpaste size.:nenau
polyurethane sealant is best it doesn't, react with steel like silicone does, and it sticks like sticky stuff.:thumbs

Small tube could work but it is really tight, cant get my hand in. Ive started a thread on trying to make up an extension nozzle.

 

[RobN]

Idea

Large syringe with a piece of tubing :thumb2

 

[rustic]

Large syringe with a piece of tubing :thumb2

The syringes you get with printer ink would work.
Most hold 10ml, but you should be able to refill from the back.

Rustic