Door locks problems

[lo_zarro]

thanks!
the only bad news is that i have to sacrify the original case, but one of the blades is really really worn, so i'll try with it!

i'll keep you updated!
and remember.. I definitely owe you at least a beer!

 

[Banshee]

thanks!
the only bad news is that i have to sacrify the original case, but one of the blades is really really worn, so i'll try with it!

i'll keep you updated!
and remember.. I definitely owe you at least a beer!

I've been in the same situation mate, in my old Maverick my key blade was so worn that it would only sometimes open the driver and rear door after some persuasion.

I took my old blade to a place called Panic Keys in Wolverhampton and he took one look at the old blade, laughed out loud, clamped it into a jig and read a load of numbers out of it, out loud.

He grabbed my new blades that I had on me and cut Mr a new one and it was perfect.

I'm sure you must be able to find someone of am equivalent skillset near you my friend?

 

[lo_zarro]

I do i do!
the second key is almost new, so i already used that one to create a copy on the new virgin blades.
I could create as much copies as i want, but i still have only two transponder for the immobilizer, inside the two original keys!

so i'll have to destroy the plastic blade holder of the original worn key to move the transponder to the new flip key, unless i disable the immobilizer!

 

[Banshee]

I do i do!
the second key is almost new, so i already used that one to create a copy on the new virgin blades.
I could create as much copies as i want, but i still have only two transponder for the immobilizer, inside the two original keys!

so i'll have to destroy the plastic blade holder of the original worn key to move the transponder to the new flip key, unless i disable the immobilizer!

We've recently been given the guy below by Romanis-King as someone who can clone Nissan Transponders

Darren at ECU Decode 01373302412

Give him a go :nenau

 

[lo_zarro]

Mate, today i did the work!

easiest as i expected, to be honest.. i made a hole near the blade of the old key so i could push out the transponder with a pin.

everything works!
thanks a lor!!