Dashboard clock

[fermergiles]

Hi all put my lights on tonight and just noticed the clock doesent light up now bulb must be blown just wondering is this a difficult job to repair?

 

[ste68blue]

I did mine a few years ago.
Quite simple, if i recall there are 4 phillips screws holding the speedo binnacle surround in place, once removed the surround comes off and there are another 4 screws holding the clocks in place, once removed gently pull the complete clock assembly out.

Locate the correct bulb holder and simply twist the black plastic bulb holder and the bulb slips out.

To replace simply reverse

Hope that helps?

 

[fermergiles]

Thx very much for your reply sounds not to bad must do it soon very annoying not knowing the time

 

[rustic]

Thx very much for your reply sounds not to bad must do it soon very annoying not knowing the time

Yes ... that easy.
When mine went, I thought I would wait until another bulb went before replacing it.... after a year or so... I lost, so I changed it anyway.
15 minutes max.:thumbs

During the time with no clock, on my Ford Radio, I just pressed "Man" twice and the display showed the time.
Nice to have it back lit again though.

 

[fermergiles]

Yep gr8 point there with the radio clock never thaught of that one ty