dashboard/clock removal

[kwackernut]

Hi,any one know how to get the speedo head/clocks out of a terrano 2 ????,mil lamp blown,and want to replace bulb,its a 1998 terrano 2 2.7 tdi touring lwb cheers:thumbs

 

[cncfabs]

Hi,any one know how to get the speedo head/clocks out of a terrano 2 ????,mil lamp blown,and want to replace bulb,its a 1998 terrano 2 2.7 tdi touring lwb cheers:thumbs

3 screw to remove the surround then 2 screws to remove the clocks.When you disconnect the plugs on back of unit there are 2 tabs to squeeze instead of the normal 1.

 

[kwackernut]

Many thanks,thought i was going to have to dismantle the whole dash !! cheers

 

[Kamsin]

3 screw to remove the surround then 2 screws to remove the clocks.When you disconnect the plugs on back of unit there are 2 tabs to squeeze instead of the normal 1.

I had to remove the lower panel and the top dash suround to get mine out.

 

[firebobby]

Me too, all easy to do though:thumb2

 

[Kamsin]

Oh yea, i agree, but did not want to poor guy to rip the lugs off thinking he had done it all. and not remove the lower pannel. :clap

 

[cncfabs]

I had to remove the lower panel and the top dash suround to get mine out.

Oh yes forgot about that bit also when removing lower panel need to take care of the electric mirror switch not to pull wiring as the switches are weak and tend to self distruct

 

[kwackernut]

cheers guys,will have a go at the weekend

 

[96terrano]

Oh yes forgot about that bit also when removing lower panel need to take care of the electric mirror switch not to pull wiring as the switches are weak and tend to self distruct

hes right, believe me:doh

 

[spautoparts]

how does the lower panel come out

 

[firebobby]

how does the lower panel come out

Screws and you then have to pull it where the lugs are, just watch you don't snap the lugs though.