Clutch Release Bearing Springs

[Banshee]

Hi Gents

I've recently had a bit of a nightmare re-attaching my starter motor back to my gearbox on Terrance thinking I was using the correct bolts and ended up stripping the threads out of the bell housing.

I managed to source another low mileage box from terranobrekershropshire minus the clutch release bearing, herein lies the issue......

The release bearing on my original box appears to have clips on the tabs of the release bearing, one is still intact and attached to the bearing but the other has snapped in half..... The one half of it was still by some miracle attached to the tab of the release bearing and the other part I found in the bottom of the bellhousing :doh



The bearing itself was a bit rattly and probably past it's best so I decided I'd get a new one hoping it would come with the spring clips, it didn't :doh

Does anyone have any lying around? Rick? Pete?, James doesn't have any, and CNCFabs hasn't been around for the past few years either :nenau he lists stuff on eBay sometimes but doesn't answer the phone number on the listings

 

[Banshee]

The new one I have brought is an original Nissan OEM part, part number 30502-7F000

This is the exact part;

 

[elty001]

I might have some,will have a look tonight when i get in from work.:thumb2

 

[Banshee]

I might have some,will have a look tonight when i get in from work.:thumb2

He's back!!!!

Thanks Unc