Clutch Pedal Bush

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ordered mine, should be here any day. It's going to be high on my list of "to do" jobs when I get back to Spain shortly. My clutch pedal is ok at the mo, but I don't see any point in waiting until the plastic one fails, as it appears it probably will! Nice one Jim!
Bruce (Terranical)
 
Yeah, mine came real fast, will take me forever to fit it probably!

Thanks for organising this.
 
Bush

Just bought one of these , fitted it the other day, bit tight in the bore so just cleaned it out a bit with some fine emery paper, greased it up and put it all back together.

Made no difference !!!

So, could it be a problem with the return spring ?
 
Just bought one of these , fitted it the other day, bit tight in the bore so just cleaned it out a bit with some fine emery paper, greased it up and put it all back together.

Made no difference !!!

So, could it be a problem with the return spring ?

Had same, just opened it up a fraction, so pin would pass right through, and to start with thought it was fixed, but on the drive across here to Wales it started doing it again.

Did see a post where the adjusting nut had come loose, so that will be my next port of call as I have already had the spring out and checked it.
 
Just returned from a caravanning holiday to Arisaig with the new bush fitted, only did about 800 miles but the clutch pedal has been faultless. :thumbs


Mick
 
I know I'm being lazy, bet there already is a thread with piccies! Has anyone got photo's showing where this wee gem sits and how to pop out the worn old bush :naughty and replace with the shiny new one?
 
I got an email from Jims mate asking if I had had problems with the bush, I found it a tad tight to get it onto the pin the 1st time, but once on, it moved freely and came off again easy.
I have found the pedal now works fine, my mate want's one now.
 
Had same, just opened it up a fraction, so pin would pass right through, and to start with thought it was fixed, but on the drive across here to Wales it started doing it again.

Did see a post where the adjusting nut had come loose, so that will be my next port of call as I have already had the spring out and checked it.

Sorted !

The rod that goes into the Clutch Slave cylinder , the other end which connects to the
clutch pedal where the bush is fitted (following me so far ?), had moved up its thread where I had been fiddling about over the last couple of weeks. So I wound the thread out a bit, and hey presto , pedal returning.

Hope that makes sense .
 
Sorted !

The rod that goes into the Clutch Slave cylinder , the other end which connects to the
clutch pedal where the bush is fitted (following me so far ?), had moved up its thread where I had been fiddling about over the last couple of weeks. So I wound the thread out a bit, and hey presto , pedal returning.

Hope that makes sense .

Clear as mud :augie:augie

I understand what your saying...honest ;);)
 
Are these still available? Nothing is coming up on the website link.
 
I thought that they were no longer available.I got mine just before i heard that they were not making anymore.
 

Latest posts

Back
Top