clunking clutch pedal

[dave123]

If it is the nylon bush on the clevis,that is worn.Its not a hard job to do.As stated slide your seat back remove the under dash trim.Pull the pin out Clevis pin will slide out.Another member found what could be used as a replacement part.From what i gather it needs to cut down to about 8mm.Apparently it will distort if cut with a hacksaw etc.But once on the Clevis pin it will be OK.Here is the link.

http://www.ebay.co.uk/sch/i.html?_t...n/Polyurethane+Internal+Tubing+Reinforcement+

do you know what size inner diameter the tubing I need to order is ? I only say this because I need to be driving it everyday . so I don't want to start taking it apart till I got the stuff to repair it

 

[firebobby]

Dave, does the pedal return on it's own when you use it, my one was stopping about an inch from it's stop and I had to lift it with my foot, that's why I changed the bush.
If your pedal is doing this, then it points towards the bush, there was a thread on here about these, I will see what I can find.

 

[dave123]

no it returns fine it has just started to click when you push it down and then clunk on the return . you can feel the clunk though the bulkhead. but it is coming from the pedal

 

[elty001]

is the pedal unit bolted down tight.
the bolts where loose on one of mine and it used to clunk as you describe.

 

[dave123]

its all bolted down tight . so I just phoned Nissan dealer and asked how much for the bushes for the clutch pedal . he replied £21.58 just for a couple of bits of plastic

 

[firebobby]

Before I ordered my bush from JimE, I made one from a pushbike brake part, it worked fine, but I thought I would get the machined part from jims mate

 

[cncfabs]

What were the bushes made from anyone got the dimensions see if i can get price cant see them being to expesive if done on the right machine

 

[dave123]

What were the bushes made from anyone got the dimensions see if i can get price cant see them being to expesive if done on the right machine[

if I could get the dimensions I could have order some pipe reinforcement tube on ebay for £2 but I can't seem to get anyone to tell me . so I have order them off Nissan . they are only plastic

 

[Terranical]

What were the bushes made from anyone got the dimensions see if i can get price cant see them being to expesive if done on the right machine[

if I could get the dimensions I could have order some pipe reinforcement tube on ebay for £2 but I can't seem to get anyone to tell me . so I have order them off Nissan . they are only plastic

The ones from Saabits are phosphor bronze, can't give the dimensions (yet), it's in Spain along with my Terrano, however I will be going over at the end of this month, so if anyone is still interested I will post the sizes. Bruce

 

[dave123]

I gather this is what's left of that bush? . I found it in the the foot well but as far as I can see it came from the centre of the spring ?. I don't know really I can't get in their . I'm a big boy and very little room don't go well together . sorry about the image

 

[dave123]

sorry double clicked

 

[firebobby]

That looks like the remains of a bush, mine was made of white plastic too, I used the parts from a pushbike brake, it was a brass tube and I just cut it down in length to fit. I will try and put a picture on here of the part.
When I fitted it, it worked well, but my pedal was not returning all the way up, that's the only symptom I had with my pedal.
I'm sure I have the remains of the old plastic bush, I will have a mooch tomorrow,