Breaking Terrano 2 and Mavericks

[rob.twigg]

looking for some good front and rear seats for 03 terrano any chance rob.,

 

[cncfabs]

looking for some good front and rear seats for 03 terrano any chance rob.,

Sorry i dont have a good interior at the moment

 

[(RIP) PLANK]

I know you have sort of answered this, but i'm lookiong for the seats and belts and bits and pieces to add rear seats to a 2003 swb commercial. Cheers

 

[cncfabs]

I know you have sort of answered this, but i'm lookiong for the seats and belts and bits and pieces to add rear seats to a 2003 swb commercial. Cheers

May have the belts are they like the rears in swb or the lwb type

 

[dave36]

plastic bit

grey moulding over rear view mirror, containing roof open switch and 2 map light switches
mine well smashed up during gearbox repair
any chance?

 

[cncfabs]

grey moulding over rear view mirror, containing roof open switch and 2 map light switches
mine well smashed up during gearbox repair
any chance?

Yes i did get your pm found one just got to remember where i put it will check tomorrow

 

[MontysMaverick]

cnc, Do you happen to have 1x torsion bar top domed spacer, this is the domed shaped part that fits into the cup where the bolt goes through and the 2 nuts wind down onto this domed shaped part, Sorry if this sounds gobbledegook but its difficult to describe. Kind Regards Monty

 

[cncfabs]

cnc, Do you happen to have 1x torsion bar top domed spacer, this is the domed shaped part that fits into the cup where the bolt goes through and the 2 nuts wind down onto this domed shaped part, Sorry if this sounds gobbledegook but its difficult to describe. Kind Regards Monty

Will check tomorrow should have but not sure what the part is until i look

 

[MontysMaverick]

Will check tomorrow should have but not sure what the part is until i look

thanks matey if you do have 1, pm me please and we can arrange payment and postage etc, it looks about 1.5 inches round and is in the cup after you take the 2nuts off the top of the torsion bar mechanism near the gearbox end, Hope this helps

 

[DingDong]

I would like the walnut centre console trims if they are available

 

[BongoBerry]

looking for wheels (alloys or steel not fussed) (5) to replace the grubbing ones on my T2 (not read the entire 12 pages so not sure what's left)

also looking for LWB springs for the rear ...

 

[BongoBerry]

looking for wheels (alloys or steel not fussed) (5) to replace the grubbing ones on my T2 (not read the entire 12 pages so not sure what's left)

also looking for LWB springs for the rear ...

make that rims not wheels, will replace the tyres with new ones

 

[BongoBerry]

add to that
- a-bar
- side steps

all for 1998 2 door T2

 

[cncfabs]

looking for wheels (alloys or steel not fussed) (5) to replace the grubbing ones on my T2 (not read the entire 12 pages so not sure what's left)

also looking for LWB springs for the rear ...

Hello
Have alloys and steel available depends what you want you can have the steels for £10 set good alloys £85 dont have bull bar or side steps already sold them (wheels will come with tyres)

 

[BongoBerry]

16" steels (need 5) would prefer in decent condition....

 

[cncfabs]

16" steels (need 5) would prefer in decent condition....

Sorry got nothing 16" just std 15"

 

[BongoBerry]

thanks anyway

 

[BongoBerry]

nearside rear seatbelt for 1998 SWB T2?

also a bonnet guard?

 

[makeitfit]

Have you got a steering box please? If so how much? It doesnt need to be a good one as I'm going to be buggering about with it:sly
Also need a left hand(passenger side) engine mounting:augie

 

[lee 4x4]

in need of the handle for the jack,not the long bar,just the turning handle.