Body lift done :)

[Paul h]

Body lift done just waiting for my mate the welder to come along and hive me a hand with bumpers,must admit the lift side of things is straight forward enough.finish it this afternoon then hopefully get snorkel bits sorted in next two week,am I as well taking the air box n filter off and using a mini mushroom filter on the top of the snorkel...any ideas

 

[Big and Daft]

...any ideas

Yeah, pictures!

 

[stinka]

Nice one on the lift

Here's snorkle ideas :

That's a cheap enclosed filter, some 76mm tube, 1x 45o and 1x 90o silicon elbow, 1 straight silicon coupler at top on to 76mm 45 bend in aluminium and finally a 76mm snorkel top

Make sure u fit the 20mm drain bung to the under side of new filter that's fitted to UR old filter and trim the hole in outer wing with body gasket from a caravan shop

Bide UR time and look for bargains on eBay and u can do this for around £100

The other option is to use a flexi hose, go up the inner wing out the top up a pillar, I wanted 3inch ducting tho, not sure if 3inch flexi will fit all way up inner wing

 

[ste68blue]

Well done Paul, i look forward to seeing the snorkel so you can test it at the next tong pay and play....:clap

 

[Paul h]

Yep hopefully going to sort it next week done the lift no problem next is some chunky tyres 265 70 15 look small now

 

[ste68blue]

put some 31s on it....they retain the usability without affecting the gearing...

 

[Paul h]

Keep scouring eBay don't want to pay the earth for them

 

[spinna]

and DON'T forget the pic's aswell:lol:thumbs

 

[ste68blue]

the ones i have were a bargain....£150.00 for the five...remoulds but who cares...they handled tong with ease...

 

[Paul h]

Keep trying to upload them but its not happening will have a word with Steve next time I see him see if he can shed any light

 

[Fez_uk]

photobucket

 

[ste68blue]

Paul if you email them to me i will put them on for you if you want?

 

[Paul h]

Can do do you want to message me your email

 

[stinka]

put some 31s on it....they retain the usability without affecting the gearing...

This, IMHO.

 

[ste68blue]

one side lifted...

and now both sides

 

[Fez_uk]

:thumbs

 

[Paul h]

Cheers Steve looks ole it's lopsided but it is actually level

 

[Paul h]

Cheers Steve will get you a brew on next meet

 

[ste68blue]

no problem paul.
if you have anymore just send them over....

What are your plans for some tyres?
Are you wanting some all terrain or aggressive patterns?

 

[Paul h]

one side lifted...

and now both sides

You can see roughly the tow bar mounting on this then there is the tow ball and NATO type hitch which holds on with a pin and split pin