Banger racing 5th

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

solarman216

Off road maniac
Club Member
Joined
Dec 25, 2009
Messages
17,416
Had a bad day today, prepping the car (Rover 400) all went well till last thing to do was kick the exhaust off, done no prob with reciprocating hack saw, started it up, ran like a bag of bones, (we left this one fuel injected cos they have baned our twin Honda carb setup and we have not got a spare Webber twin choke) guess the management system did not like the lack of back pressure, it was getting dark and I now had to put the exhaust back, finished well after dinner time, not impressed at all, but it is at least running better now, although the clutch is weak, so will have to be careful tomorrow, will try and get some pics for you all to see, bed now, early start tomorrow, hate early starts, Rick
 
So did I but the guy never sent the deposit, so now its a banger, Rick
 
what you need is a old lada riva 1500 , not fast , but built like a tank mate
 
Well had a good day, 1st race stuffed NS track rod & drive shaft, and bent OS rear wheel 30 degrees after 4 laps, 2nd race sorted track rod & shaft, but another 4 laps and rolled it, (4 rolls), 3rd race got spun on top bend after 3 laps stalled it and battery gone no start, but at least I have a car for Arena Essex next week end, just got to do some repairs first, Rick
 

Attachments

  • before the start 1.jpg
    before the start 1.jpg
    59.5 KB
First two of nice tidy motor before the start.
 

Attachments

  • before the start 2.jpg
    before the start 2.jpg
    59 KB
On the grid, waiting for the off.
 

Attachments

  • on the grid.jpg
    on the grid.jpg
    59.4 KB
After rolling (4 rolls) I am told, I just remember being on the side struggling to get out of the harness, as my goggles had come off and had eyes full of crud.
 

Attachments

  • 3 races later 2.jpg
    3 races later 2.jpg
    79.1 KB
Never thought I would ever bend that roof plate, takes 2 to lift it up there, on the last race I had to keep my head to the left as roof has come down.
 

Attachments

  • bent roof plate.jpg
    bent roof plate.jpg
    59.6 KB
Roll cage and harness fixings stood up well, no problems there this time, I have been known to pull the harness out of the floor, so now fix to roll cage bolts.
 

Attachments

  • roll cage and belt fixings stood up to it.jpg
    roll cage and belt fixings stood up to it.jpg
    64.5 KB
But the steering wheel is still in the right place so this motor will be racing at Arena next Sunday.
 

Attachments

  • stearing wheel is in same place.jpg
    stearing wheel is in same place.jpg
    78.1 KB
Good job mate :D
I used to grass track in minis (that's the little car NOT the little skirt :augie )
Wife wont let me anymore so the 4x4 is the nearset I get now :doh
Enjoy :cool:
 
Good job mate :D
I used to grass track in minis (that's the little car NOT the little skirt :augie )
Wife wont let me anymore so the 4x4 is the nearset I get now :doh
Enjoy :cool:

Never done any grass track, only been doing bangers for 11 months, but you have to do something to get a buzz, life would be a bit drab otherwise dont you think, anyway I enjoy it and suprisingly so does the wife but she did get a bit concerned when I rolled, and to my disapointment did not get any pictures, never mind there is always next time, Rick
 
Lifes too short not to get a buzz her n there:augie
I get mine racing cats now (not the 4 legged furry ones):D
Keep it up :naughty
 

Latest posts

Back
Top