A little bit of this and a little bit of that

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
rear wings done

rear wings done will be doing other tomorrow
 

Attachments

  • 005.jpg
    005.jpg
    53.1 KB
I can't wait to see this beast in action, when do you think it will be ready for it's 1st mud bath.
 
Excellent, yes it will circulate just fine just make sure you have no air locks, squeezing hoses helps, but make sure if you have gone down from the engine with your pipes and then up to the rad that you have a easy bleed point at high points engine end, and this is not loosen a hose to do so, this is the way to get burn't, Rick
 
Looking good but you need to stop teasing us with clean pics:naughty
 
dont worry mate once at fickley it will be dirty very dirty
 
cant wait to get it to 88mph

exhaust looks abit strange but its growing on me, theres method behind the madness, it cost me 30 pound for the full exhaust and that was just for the front pipe + if it does stall in water the water wood have to be 5 n half foot deep to get round the bend this is why i have done this and + i can dry my ropes on it and dry my hands on the back box
 

Attachments

  • 040.jpg
    040.jpg
    42.1 KB
side view

told the woman to take me a picture of the side and shes only done half a job as she usually does :doh
 

Attachments

  • 038.jpg
    038.jpg
    39.7 KB
front view

when i put the wheel spacers on it will look better
 

Attachments

  • 041.jpg
    041.jpg
    48.7 KB
I haven't commented on this project so far, but it looks really good!

Are you a welder by trade?

Regards

Alan
 
Great idea with the exhaust:thumb2 but it's going to take you hour polishing to keep it that shiny:lol:lol:lol
 
Am I missing something ?

I've seen better looking banger racers..........at the end of a destruction Derby.

The styling cues are straight from the Panzer School of Creative Design.

Suspect the steelwork was salvaged from Ned Kelly's old metal jacket !!
 
I've seen better looking banger racers..........at the end of a destruction Derby.

The styling cues are straight from the Panzer School of Creative Design.

Suspect the steelwork was salvaged from Ned Kelly's old metal jacket !!

Yep you are missing the fact it is for serious off road driving as in pay and play sites, look at my avatar the body is beaten to bits after leaning into trees etc, all that steel work will go some way to protect the main body of the motor, but I do fear the doors need better protection, like maybe a swing out arm that connects to the uprights front and back of the doors, Rick
 

Latest posts

Back
Top