S
Scarred4life Motorsport
Guest
i need advice on suppliers or fabricators to raise my patrol 3l GR on a 51 plate by 2inches....help would be gratefully received...karl
Help Support Nissan 4x4 Owners Club Forum:
extreme-4x4
Well-known member
- Joined
- Sep 25, 2008
- Messages
- 6,216
terranosorus give hime a try. he made the t2 lift kits .im sure he'd be interested in sorting something
- Joined
- Feb 25, 2005
- Messages
- 1,409
You can try these guys
http://www.taubenreuther.com/?id=05
I've got a 2" lift on mine OME is the kit I went for.
You need 4 springs and shocks. You don't need anything else for a 2" lift.
You don't need any special tools and you can change the springs without spring compressors, you just drop the axles pull out the springs and swap them over.
ONE THING TO REMEMBER. OME rear springs are different lengths they are maked A & B and A which is longer goes on the drivers side.
:thumb2
http://www.taubenreuther.com/?id=05
I've got a 2" lift on mine OME is the kit I went for.
You need 4 springs and shocks. You don't need anything else for a 2" lift.
You don't need any special tools and you can change the springs without spring compressors, you just drop the axles pull out the springs and swap them over.
ONE THING TO REMEMBER. OME rear springs are different lengths they are maked A & B and A which is longer goes on the drivers side.
:thumb2
