Search results

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Terrano 2 ignition transponder

    Can anybody tell me whether or not the transponder around the ignition barrel is coded to the car or not? Many thanks in advance.
  2. M

    Car won't start only crank over

    Cup There are no wires at the front. Could the ckp be at the back instead? Thanks
  3. M

    Car won't start only crank over

    Went out in terrano 2 2.7tdi yesterday all fine. Turned it off and then tried to start a few minutes later and just cranked over and over. Can't get ml indicator to flash a fault code. Any ideas?
  4. M

    Tool Box Area

    Tool Box Area in this Forum Ha Ha - can somebody tell me the answer now. Thanks
  5. M

    stereo connectors

    Hazard Switch Do you know which one - there are loads on ebay? Cheers.
  6. M

    Tool Box Area

    I must be blind, I can't find it. Can somebody point me in the right direction. Many thanks
  7. M

    Swapping radio for another

    The radio in my Terrano is knackered. I therefore bought a second hand original nissan unit from ebay that came with 'code' and cd multi-changer. It is the radio with the hazard switch intergrated into the radio face plate. However, after fitting it the fascia says 'safe'. I then read the...
  8. M

    stereo connectors

    Hazard Switch Can you get a hazard switch that plugs straight into the nissan wiring harness? If so, where from? Thanks.
  9. M

    radio

    Radio Coding I have the same problem. Bought a replacement original stereo and cd mutlichanger with 'code' but owners manual says linked to ECU. Did you get yours unlocked so it works like an after martket stereo? If so, by who and how much did it cost? Thanks in advance.
  10. M

    Terrano 2 2004 Model - ECM (ECU replacement)

    Anyone?
  11. M

    Terrano 2 2004 Model - ECM (ECU replacement)

    Thanks for the responses - I thought they should be able to clear it and reprogram the existing keys to the new ECM. Does anybody no a 'helpful' dealer in the Yorkshire area that will do the reprogram (or an independent garage with the required consult and software)? I don't think the dealer...
  12. M

    Terrano 2 2004 Model - ECM (ECU replacement)

    Only got the ECU from the breaker - is it not possible to program it to the car?
  13. M

    Terrano 2 2004 Model - ECM (ECU replacement)

    It is a 2.7. Thanks.
  14. M

    Terrano 2 2004 Model - ECM (ECU replacement)

    I am having a big problem with my Terrano 2 that I have owned for a few months now. Basically I needed to change the ECU/ECM and as such have bought an identical ECU/ECM second hand. I then took the car (partially dismantled for Nissan Main Dealer's ease), the ECU and the both keys for my car...
Back
Top