Search results

Hi folks!! Yep I've gone and done it this time, lost 1 key for my 2004 T2 need to be cut and programmed to ECU . Lost my one and only key for my 1996 Maverick the one with the little red chip at the top, lucky the mav is in the work shop and open, how do I go about sorting the replacement keys...

Hi folks help needed please on buying a turbo and actuator for a 2006 ford mondeo diesel, the car has been diagnosed with an actuator fault, I have asked the local ford dealer which is ouch. As u would expect so it's back to basics for me , a few years back I put a new turbo on a maverick and as...

The spare trucks are the older models , I notice on ebay that there are reconditioned Maff sensors available. Would you recommend them ?

yes all filters have been changed full service by my self, i am very fussy when it comes to service . if there was a banjo filter there i defiantly gone there first i know this model ain't got one.

My 2004 2.7tdi T2 is lacking a bit of grunt it drives ok but when you come to hill it doesn't seem to have enough of poke, fuel consumption is down as well but on motorway not to bad. if feels like your driving with the hand brake on but i know that's not the case cause ive had all wheels...

An update for you all - OK last Saturday we gat the Clutch back out to find that it was was the wrong way around emm - On Sunday i started the rebuild, We kept working on it until 5.pm by this time i was a bit f**ked, I noticed through out the day the back of my right hand had began to swell up...

Yes it took us two hours to get the clutch back out and i know it's a lot longer to put together, I have started rebuilding this morning , so the T2 should be back in operation this evening fingers crossed.

OK silly me in our rush i put the clutch in the wrong way around - Just got him back out and there we are then .

Would you say the thrust bearing is not sat on the fork properly, The reason the clutch was changed is that the car is 8 year old and have previously towed a caravan before i owned it , i know theses T2S once you get about 60 thou on the clock you looking to change the clutch depending on what...

Hi Folks - I have just fitted a new clutch kit in my 2004 2.7 TDI, i just replaced all ancillaries and put every thing back together only to find out it will not go into gear whilst engine is running em mm when engine is stopped gears are selected with no problems . i have just bled the clutch...

Got an account with millner just checking prices, Euro parts £12.00 with grease nips will try them .

Hi Folks Going to renew my top ball joints on my 04 T2 and the clutch as well, So i gave Nisan a call to price up these parts. Top Ball joints £105.00 + Vat = £126.00 Each x 2 = £252.00 What are the ball joints made of gold . The Clutch was priced at £250.00 + Vat = £300.00 Not so bad just a...

Welcome to the best 4x4 club there is, and you can certainly have a good laugh. Mav4xr :-)

Thanks for the posts, I will order a New Clutch and bits on Thursday and when i have chance at the weekend or early next week i will get the clutch out, As for the oil yep you were right it is gold so the box may have to be dropped out then to get at the seal. To replace the oil seal is that a...

Just been for a run in the T2 and noticed from 3rd to 2ND there was a bit of a judder, I think me clutch is showing signs of being cupput :-(. I don't want to risk 3000 miles in Europe so i will have to price one up and get on with the job.

After reading past posts on the forum it seems like i may have a big problem with my gearbox on my 2004 2.7tdi 5dr terrano :-( When you turn the engine off the gear stick wobbles back and 4 as if the rubber mount is gone underneath also there seems to be a back pressure noise on switch off in...

Thank you for the replies, I will be looking at a vauxhall maf . And a big thank you to theron you have certainly done your home work.

Got the little blighters out with a Grips :-) have now cleaned sensor wire with electrical cleaner, OK fingers crossed. Here are the part numbers 0281 002 596 and 22680-7f406 I have seen some on eBay with part numbers 0281 002 594 will this different part number effect the amps to the ECU. or...

OK need to get maf sensor out to clean , Can any body tell me what they call that 5 star security screw with a hole needed on screw driver, At the moment i can't find any thing that fits :-(

Hi All We have a 2004 Nissan Terrano 2.7TDI, Whilst driving to and from work the engine dies down and you can only drive the car at 10 Mph, Pull over and turn engine off for 5 mins Start him up and away we go. This process has been repeated 6 times now. 1 I suspect the maf is on its way out ...