Search results

I'll have the last 3 off you if you still got them m8 :thumb2

Here's the video I done and im sure ill get ribbed for something on it :lol http://https://www.youtube.com/watch?v=buqR3HhhzY0

Cuz its a manual.....:augie

Turbo was a second hand one as i was told by someone said it was gone on the old one,so warranty on it.With the engine running and i forgot to say also the pipe from the turbo to the air filter was removed as there was oil in there as well,the motor wont rev past 2000rpm but i had the maf...

Right a bit of a update on this.I took the intercooler off and left it on its side and as everyone said,there was oil in there.So with that off i started the truck up and as said tick over was not the best however there was no nasty bangs,oil flying out everywhere.What we did notice was there...

is it safe to run the truck for a min or 2 with the intercooler removed ???

True but i know it wasnt over filled with oil before i started it as i checked :thumb2

I replaced the turbo about 2 months ago but have noticed that there is now a oily like shine in the water now where i took the rad cap off

Right after a few problems i seemed to of work issues with the truck,so today i thought id give the truck fresh oil and filter.Took to for a run before hand to get it up to temp and then whipped it up on the ramps When i lifted the bonnet thinking of it i did kind of smell an oily smell but at...

My 1999 T2 only does 21mpg but thats alot of up and down hill driving,checking horses, but ive a power issue with my truck anyway so that maybe why its that low.Mine has a Bosch system

I need to get my truck back on the road asap and have been advised about upgrading the wiring to the battery.I need a fix for now before but only cable i can get locally is a 300amp one and its the one that runs from the battery to the starter.So is that safe to use for now :nenau

what I mean is if I took the pipe off the blowby valve that goes to the rocker cover then blow through the pipe its self to the rocker cover its self. Realised that the unit on the rocker cover unbolts so ive taken that off and soaked it in petrol and cleaned it all out,and now its unblocked so...

Right I think im on to something here.With the blowby valve the pipe that comes from the rocker cover I can blow not suck on the pipe at all going to the rocker cover,so is this right or am I on to something here :nenau

I get what you mean m8 and that's my plan :thumbs. Had a chat with R1cho about this who has helped out loads and after he's spoke to a m8 who restores motors he said try to do and oil change with an engine flush as well in case there's a blockage somewhere on it.Its due a change now which ill do...

Whilst i remember tappets where done a couple of months ago and the only mod ive done to the engine is an induction kit

Right after my previous thread and the advice given i got myself a compression tester due to overheating under load and slight loss of water but sniff test didnt show a sign of a leak.The readings i got are Cylinder 1-480 psi Cylinder 2-440 psi Cylinder 3-440 psi Cylinder 4-420 psi All of...

Had one like that on mine a few months ago and took bloody ages to work out why but mine was that in each corner on the front of the sunroof when I removed it there is ment to be 2 small rubber bits in the corner that where missing that sit on the lip on the bend,so what it did was I had a old...

Interested in them.PM sent

Right so the catch can needs to be vented :nenau

right so when i fit the catch can, i need to just block off the pipe that would of went from the turbo/air intake pipe to the blowby and then fit one pipe from the rocker cover and the other from the sump to the inlets on the catch can :nenau