Search results

Not sure if this will work, trying to upload pic of console

Thanks Banshee, this issue has been going on for a couple of weeks, very frustrating, the feeling you get from a successful self repair is delightful, early days though so won't crack open the champagne yet, been there too many times before. Got an impact open 27mm socket which will also do no...

Ok, got it back on and took it up my local dually and so far so good, bone dry and running smoother. I'll take it for a proper road test later and on the way to work tomorrow so will report back then. Disassembly and clean up easy with guidance from manual, whole section devoted to just this and...

Had the same issue on my old mag and welded it myself then not long after whilst in town I thought it had gone again but this time turned out to be a split in the clutch fork where the slave cylinder pin activates on it. Couldn't be welded in place so clutch has to come out to replace fork so...

Just as an aside I have had the clutch done by my local garage, supplied the kit LUK and they charged £430based on 7.5 hours labour so not too bad as had quotes over£1000 Took the opportunity to paint centre console and fill holes left from police use (doughnut and coffee holders?) colour coded...

Looks like Bosch as their is a small stamp on housing that looks like Bosch logo. Not sure without my glasses so could be rust! I'll post the code when I find my specs.

Removed and disassembled the injector. The needle where it tapers had some black deposit on one side so have cleaned that off with fine wire wool and soaking all the bits overnight in unleaded (for want of anything better) Will clean it thoroughly in the morning and refit. I'll report update...

I think Bosch but not sure, how do you identify them? Nix spec 1st have replacements for £42 untested but with 3month warranty

Ok, have an interesting one here. No 4 injector is leaking. Definitely not blank or leak off pipes as have replaced them twice now. No leak at idle but leaks with load, appears to come from base of leak off either pipe or blank. Diesel is squirting out not as a mist. There is also buzzing coming...

Read through some old threads and it would seem the gauge is fitted correctly and also readings go up to 17psi so all good there. Waxoyl will wash out of hair if you are persistent, next time I'm going to employ a disposable shoe cover as hair PPE. Cheers

Hi guys, Got an interesting one here. My son bought me a boost gauge which we fitted, t-ing into the short 4" pipe off the back of the turbo. Not sure if this is the best place to connect it to start with as when we took it out we got the boost up to 16psi when I believed 12psi was about the...

I have the removable back seats from my old lwb maverick for sale. No rips and in decent nic. £50 buyer collects. I'll send a pic if your interested. Thanks

Thank you for the great replies. I looked into the tunit2 and a couple off e-bert and can see they work but will hold fire until clutch is done. Mine runs well so not in a hurry to spend on it yet but can't help but 'tinker'. Cheers

That's great, think I'll go with the standard as no point shelling out extra p for little benefit. On another topic does anyone have knowledge of the power chips that attach to the maf/map sensors? Can't find much about them online and am in debate with my son as to there effectiveness. I'm not...

I have now found a stage 1 clutch kit from drivetorque for £218 Anyone had any experience with these?

Hi Guys, Gotta put a new clutch on my '05 Terrano 2.7tdi as it is slipping in 3rd, 4th and 5th now. Looking at a Borg & Beck HK6747 3 piece kit for £127.00 I've checked compatibility and seems right, does anyone know of a better option, only planning to do this once so dont mind spending a bit...

Hi guys, I got the info on resetting the MIL for the earlier 14 pin data link connector but can you do it on the later 16 pin version. On the 14 pin you connect the CLK terminal to the IGN which are next to each other if I read Toolbox's instructions correctly but can't see how to do it with the...

Thanks for the great replies! Anyone got spacers for sale or where would be best to get them from and how much to space by?

Paid £1800 for it, checked previous mot's online for rust issues and none ever mentioned. Just needed new glow plugs to sort white smoke on start up then full fluids and filters change plus ancillary belts. Bargain!!!

Couldnt see anything on the paperwork but seems to pull way better in 3rd and 4th then takes off in 5th compared to my last one. Also rear drum brakes look way bigger than my last plus have full restraint for middle rear passenger mounted in the roof. Nice little bonus' from plod, thanks...