Search results

Allora in bocca al lupo per il tuo " nuovo " motore , e soprattutto per la nuova anca in titanio Giacomo

Hi all, problem fixed after having reassembled, taken the injection pump to the specialist, and having done the set up correctly, the engine is now fine thank you Giacomo

Hi, any advice or idea to solve my problem ? apart from returning the pump to the seller ... thank you Giacomo

Hi all, update I mounted the new rebuilt Zexel pump, but when the engine is starting, it stays at 1400 rpm for a few seconds and then goes to 900 rpm, furthermore, during the driving there are some power gaps ( I don't know what to call them ) for now no mil light thank you Giacomo

Come costo all'incirca stiamo lì, ma non è facile trovare il pompista bravo che ci voglia mettere le mani..... Giacomo

Thank you panelbeater and you didn't need to mount the comparator to do a detailed timing ? Giacomo

Grazie lo_zarro, sì con una ricostruita Giacomo

Thank you do you know if in the forum there is a " how to "with some pics ? furthermore, supposing that the pump arrives with its key at 12 o'clock, and I involuntarily give it a 360 ° turn, what happens ? Giacomo

Thank you Rick since I will have to replace the Zexel pump, and after reading the very little information about the workshop manual, I wanted to know if there are any particular operations to pay attention to in particular I would like to know if in addition to phasing the two timing gears and...

Thank you Rick, ecutalk consult cable arrived, diagnosis made with the following fault codes : 11 cam pos. sens. ( pump ) 18 F/Inj F/B2 47 Crank Pos Sen ( TDC ) 1403 Nats malfunction Giacomo

Sorry, the photo is upside down..... Giacomo

I will also check these small earth connections, but I see that you tend not to take into account error code 18, relating to the injection pump, why ? also I would kindly like to know if the mini filter is inside the banjo bolt that you see at the top right of the attached photo thank you Giacomo

Volts ac test : 2,4V I removed the crank position sensor ,no crud on the magnet but there was some oil Giacomo

I did the resistance test: 1400 ohms while the Volts ac test must be done with the connector connected or disconnected ? thank you Giacomo

Thank you solarman216 do you know on which connector pins to make this measurement in V ac? Giacomo

however, the problem does it even when the engine is cold..... thank you Giacomo

In fact it is what i will do as soon as i receive the ecutalk consult cable ..... Giacomo

Terrano2 12.1996 Zexel Pump Giacomo

Thank you elty001 but shouldn't the crankshaft position sensor give problems especially when starting ? and for code 18 would you replace the injection pump.....? Giacomo

Hi all, I have this Nissan Terrano 2 2.7 Tdi (Zexel pump) that has the following problem: at about 1000/1200 rpm, touching the accelerator pedal, the engine misses, loses blows, saw ..... and turns on the mil light. while waiting for EcuTalk consult cable to arrive, I have already to fit a new...