what have you been upto today

tezzer · 10-09-2009, 14:55

well i have painted my second hand bumper i got from jimmy, and it's looking good, so then i thought i would check my auto hubs

to make sure they were disengaged, they was'nt, so i removed cover, the one on the end that unscrews and low and behold some dick head with a welding torch beat me to it, he has welded the drive sharft to the hub, now im up the river without an oar.

so im going to need a pair of drive sharfts (i hav'nt checked the other side yet) and a pair of auto / manual hubsin the near future. so im off to give my escort a gentle run around the block.

zippy656 · 10-09-2009, 15:04

Quote:

Originally Posted by tezzer

well i have painted my second hand bumper i got from jimmy, and it's looking good,pics then! so then i thought i would check my auto hubs

to make sure they were disengaged, they was'nt, so i removed cover, the one on the end that unscrews and low and behold some dick head with a welding torch beat me to it, he has welded the drive sharft to the hub, now im up the river without an oar.

pics then!

so im going to need a pair of drive sharfts (i hav'nt checked the other side yet) and a pair of auto / manual hubsin the near future. So im off to give my escort a gentle run around the block.

hehehe well i got to ask!

tezzer · 10-09-2009, 17:05

i;ll see what i can do, but it will be tomorrow now, going out tonight,

Adz · 10-09-2009, 20:00

Quote:

Originally Posted by tezzer

well i have painted my second hand bumper i got from jimmy, and it's looking good, so then i thought i would check my auto hubs

to make sure they were disengaged, they was'nt, so i removed cover, the one on the end that unscrews and low and behold some dick head with a welding torch beat me to it, he has welded the drive sharft to the hub, now im up the river without an oar.

I'll pop round with me

I'll soon cut through that weld

lacroupade · 10-09-2009, 20:48

Quote:

Originally Posted by tezzer

well i have painted my second hand bumper i got from jimmy, and it's looking good, so then i thought i would check my auto hubs

to make sure they were disengaged, they was'nt, so i removed cover, the one on the end that unscrews and low and behold some dick head with a welding torch beat me to it, he has welded the drive sharft to the hub, now im up the river without an oar.

so im going to need a pair of drive sharfts (i hav'nt checked the other side yet) and a pair of auto / manual hubsin the near future. so im off to give my escort a gentle run around the block.

what an A1 bitch that is!!!!

good luck fixing it mate!

Thomas-the-Terrano2 · 10-09-2009, 20:57

doesnt that just mean you have fixed hubs like the last t2s

ok so prop will turn but will be free at transfer box til put in
4wd.

zippy656 · 10-09-2009, 21:27

but lower pmg too i think

lacroupade · 10-09-2009, 21:55

Quote:

Originally Posted by zippy656

but lower pmg too i think

Is that like pmt?

zippy656 · 10-09-2009, 22:01

nope

mpg... just in zippish

Thomas-the-Terrano2 · 10-09-2009, 22:07

neglible on something areodynamics of a brick.

.x of an mpg, doubt if cover cost of buying auto/manual hubs

tezzer · 10-09-2009, 22:46

Quote:

Originally Posted by Thomas-the-Terrano2

neglible on something areodynamics of a brick.

.x of an mpg, doubt if cover cost of buying auto/manual hubs

i never thought of it like that, i might just put up with it, at least i wont get any problems with the hubs

zippy656 · 11-09-2009, 05:43

thats true Tezzer.. save your money for a few days away

paulp · 11-09-2009, 08:24

Hi Tezzer

consider the following

1, did it bother you before you knew
2, will it do any damage
3, is it dangerous.
4, will it still work

If the answer is NO to all -- leave it be

have another beer and enjoy.

regards Paulp

never done one before but If you really want to do it, i am ok with a spanner and local (busy for the next couple of weekends) give me a shout and i will happily help where poss.

tezzer · 11-09-2009, 11:39

thanks for your offer paul, i was checking the fuel consumption because it seemed high compared to our old t2, i checked that hubs were working ok, when i found they were welded, but as ttt2 stated will it really matter, which is true, but if i find a t2 being broken local i will change them and the sharfts.
so it will stay as it is for now mate.

zippy656 · 11-09-2009, 11:46

Tezzer i put a K&N in, got a bit more MPG..

10-09-2009, 14:55	#1
tezzer Senior Member Join Date: Nov 2008 Location: basildon essex Vehicle: transit camper van 1987 Posts: 2,829	what have you been upto today well i have painted my second hand bumper i got from jimmy, and it's looking good, so then i thought i would check my auto hubs to make sure they were disengaged, they was'nt, so i removed cover, the one on the end that unscrews and low and behold some dick head with a welding torch beat me to it, he has welded the drive sharft to the hub, now im up the river without an oar. so im going to need a pair of drive sharfts (i hav'nt checked the other side yet) and a pair of auto / manual hubsin the near future. so im off to give my escort a gentle run around the block.

10-09-2009, 20:57	#6
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	doesnt that just mean you have fixed hubs like the last t2s ok so prop will turn but will be free at transfer box til put in 4wd. __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

10-09-2009, 22:07	#10
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	neglible on something areodynamics of a brick. .x of an mpg, doubt if cover cost of buying auto/manual hubs __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

11-09-2009, 08:24	#13
paulp Senior Member Join Date: Apr 2009 Location: essex Vehicle: nissan mistral 27td Posts: 1,043	hubs Hi Tezzer consider the following 1, did it bother you before you knew 2, will it do any damage 3, is it dangerous. 4, will it still work If the answer is NO to all -- leave it be have another beer and enjoy. regards Paulp never done one before but If you really want to do it, i am ok with a spanner and local (busy for the next couple of weekends) give me a shout and i will happily help where poss.

10-09-2009, 17:05	#3
tezzer Senior Member Join Date: Nov 2008 Location: basildon essex Vehicle: transit camper van 1987 Posts: 2,829	i;ll see what i can do, but it will be tomorrow now, going out tonight,

10-09-2009, 21:27	#7
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	but lower pmg too i think

10-09-2009, 22:01	#9
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	nope mpg... just in zippish

11-09-2009, 05:43	#12
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	thats true Tezzer.. save your money for a few days away

11-09-2009, 11:39	#14
tezzer Senior Member Join Date: Nov 2008 Location: basildon essex Vehicle: transit camper van 1987 Posts: 2,829	thanks for your offer paul, i was checking the fuel consumption because it seemed high compared to our old t2, i checked that hubs were working ok, when i found they were welded, but as ttt2 stated will it really matter, which is true, but if i find a t2 being broken local i will change them and the sharfts. so it will stay as it is for now mate.

11-09-2009, 11:46	#15
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	Tezzer i put a K&N in, got a bit more MPG..