Waffle boards

iandouglas · 01-05-2009, 22:07

HI IVE AQUIRED SOME RAW BOARDING THESE THINGS ARE MADE FROM.
INCLUDING THE GRIT SURFACE. ANY COLOUR AS LONG AS ITS GREEN

ANYONE INTERESTED .
ITS NOT BEEN CUT TO LENGTH OR WIDTH YET , .
HAVE A LOOK AT THE LINK BELOW FOR AN IDEA OF USE ECT.
BUT DONT EXPECT TO PAY THAT SORT OF PRICE .
rgds.iandouglas

http://cgi.ebay.co.uk/OFF-ROAD-4X4-B...QQcmdZViewItem

extreme-4x4 · 01-05-2009, 22:11

so what sort of price should we expect to pay then

interested sort of. i already have some but have other ideas for uses...

think makeitfit will be interested too but he's away. i can text him though ... if stock gets low

Deleted Member S · 01-05-2009, 22:15

Hi Ian could you poss let me know of the price please

iandouglas · 01-05-2009, 22:32

hi extreme and sweety dont know about price yet but i wouldnt want to pay more than £20 to £30
then theres the problem of getting them to you all

zippy656 · 01-05-2009, 22:36

Quote:

Originally Posted by iandouglas

then theres the problem of getting them to you all

if we get enough members wanting them, maybe we can pass them on chain style, take two and pass them on.. each person coing half way to the next..

might work.. looking at the members map might help, ( if everone was on there it might work ) just an idea..

Zippy

extreme-4x4 · 01-05-2009, 22:36

parcel2go.com

thats who i use

lacroupade · 01-05-2009, 23:02

Thickness?

iandouglas · 01-05-2009, 23:07

ok that looks like sorting the delivery.

have you looked at the advert they seem to do 3 different lengths .
1490mm X310mm X50mm/ 1220mmX310mmX38mm /1000mmX310mmX38mm
ive just measured them two are 5`.11" long and near 1¬11 wide.
so will they make 2 sets per board.I think these will be the smallest .
SHOULD BE BIG ENOUGH FOR MOST SITUATIONS
THE THICKNESS 40 mm.
i want to make as many sets out of them as i can to reduce wastage.
which will keep price down should be a few off cuts as well to use as jacking mats.
i think these will be more suitable for terrano/maverick due to size.
as a starting point would 1m in length as the smallest be long enough .
measure your trucks and decide where you would put them .
inside or on roof rack.
and remember i want one set for my disco .
rgds.iandouglas

extreme-4x4 · 01-05-2009, 23:08

mine fit inside . i have made it so they strap to the back of the rear seats. permanently
i can do pics tomorrow and measure mine if it helps.... just another idea

others might want to do the same. then you have them all the time, you never know when you will need them

extreme-4x4 · 01-05-2009, 23:13

also 1 metre is usually the cut of point for cheap delivery costs

Damian Strudley · 01-05-2009, 23:30

Please put my name down for a set.. Would also be fitted in the back of the T2

Am willing to be part of the chain for delivery if required.

dinky · 01-05-2009, 23:52

one pair to doncaster will pick up if possible

extreme-4x4 · 02-05-2009, 10:02

here's some pics of how mine is set up

mine measure 1200 x 300 mm

oh and excuse the interior i got a new one to fit when i clean it

lacroupade · 02-05-2009, 11:20

Extreme!! Who's truck is that then? Coz no way on gods earth is yours ever that tidy mate!!! LMAO!!

lacroupade · 02-05-2009, 11:21

By the way, where did you get those little orange straps from? I want some...

01-05-2009, 22:07	#1
iandouglas Senior Member Join Date: Jun 2005 Location: NOTTINGHAMSHIRE Vehicle: LANDROVER Disco 300TDI Posts: 1,802	Waffle boards HI IVE AQUIRED SOME RAW BOARDING THESE THINGS ARE MADE FROM. INCLUDING THE GRIT SURFACE. ANY COLOUR AS LONG AS ITS GREEN ANYONE INTERESTED . ITS NOT BEEN CUT TO LENGTH OR WIDTH YET , . HAVE A LOOK AT THE LINK BELOW FOR AN IDEA OF USE ECT. BUT DONT EXPECT TO PAY THAT SORT OF PRICE . rgds.iandouglas http://cgi.ebay.co.uk/OFF-ROAD-4X4-B...QQcmdZViewItem

01-05-2009, 22:32	#4
iandouglas Senior Member Join Date: Jun 2005 Location: NOTTINGHAMSHIRE Vehicle: LANDROVER Disco 300TDI Posts: 1,802	waffle boards hi extreme and sweety dont know about price yet but i wouldnt want to pay more than £20 to £30 then theres the problem of getting them to you all

01-05-2009, 23:07	#8
iandouglas Senior Member Join Date: Jun 2005 Location: NOTTINGHAMSHIRE Vehicle: LANDROVER Disco 300TDI Posts: 1,802	waffle boards ok that looks like sorting the delivery. have you looked at the advert they seem to do 3 different lengths . 1490mm X310mm X50mm/ 1220mmX310mmX38mm /1000mmX310mmX38mm ive just measured them two are 5`.11" long and near 1¬11 wide. so will they make 2 sets per board.I think these will be the smallest . SHOULD BE BIG ENOUGH FOR MOST SITUATIONS THE THICKNESS 40 mm. i want to make as many sets out of them as i can to reduce wastage. which will keep price down should be a few off cuts as well to use as jacking mats. i think these will be more suitable for terrano/maverick due to size. as a starting point would 1m in length as the smallest be long enough . measure your trucks and decide where you would put them . inside or on roof rack. and remember i want one set for my disco . rgds.iandouglas

01-05-2009, 22:11	#2
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	so what sort of price should we expect to pay then interested sort of. i already have some but have other ideas for uses... think makeitfit will be interested too but he's away. i can text him though ... if stock gets low

01-05-2009, 22:15	#3
Deleted Member S Senior Member Join Date: Jun 2007 Posts: 2,711	Hi Ian could you poss let me know of the price please

01-05-2009, 22:36	#6
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	parcel2go.com thats who i use

01-05-2009, 23:02	#7
lacroupade Senior Member Join Date: Jan 2009 Location: All hail to the Glove of Love... Posts: 9,212	Thickness?

01-05-2009, 23:08	#9
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	mine fit inside . i have made it so they strap to the back of the rear seats. permanently i can do pics tomorrow and measure mine if it helps.... just another idea others might want to do the same. then you have them all the time, you never know when you will need them

01-05-2009, 23:13	#10
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	also 1 metre is usually the cut of point for cheap delivery costs

01-05-2009, 23:30	#11
Damian Strudley Member Join Date: Mar 2009 Location: Kent is my main base agian still work in Yorks Vehicle: Maverick Chasseur lwb Posts: 55	Please put my name down for a set.. Would also be fitted in the back of the T2 Am willing to be part of the chain for delivery if required.

01-05-2009, 23:52	#12
dinky Senior Member Join Date: Nov 2006 Location: SOCIALIST REPUBLIC OF SOUTH YORKSHIRE Vehicle: t20 lwb Posts: 1,238	one pair to doncaster will pick up if possible

02-05-2009, 10:02	#13
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	here's some pics of how mine is set up mine measure 1200 x 300 mm oh and excuse the interior i got a new one to fit when i clean it

02-05-2009, 11:20	#14
lacroupade Senior Member Join Date: Jan 2009 Location: All hail to the Glove of Love... Posts: 9,212	Extreme!! Who's truck is that then? Coz no way on gods earth is yours ever that tidy mate!!! LMAO!!

02-05-2009, 11:21	#15
lacroupade Senior Member Join Date: Jan 2009 Location: All hail to the Glove of Love... Posts: 9,212	By the way, where did you get those little orange straps from? I want some...