body panel adhesive ???

extreme-4x4 · 18-04-2009, 00:03

where to buy
whats the best value

need about 4 tubes

(silicone size tubes)

oh underseal too i recon

makeitfit · 18-04-2009, 00:45

What do you need to stick?

lacroupade · 18-04-2009, 07:42

Quote:

Originally Posted by makeitfit

What do you need to stick?

i dread to think! whats he up to now??

elty001 · 18-04-2009, 08:35

i use either sikaflex or tiger seal.it comes in the tubes you put on a mastic gun.get mine from local cheapo wherehouse type shop as its quite pricey from the bodyshop consumables place.
it also does underseal and shultz but you need a shultz gun and a compressor.did mine a couple of months ago with the shultz.used 2 ltr of the stuff.quicker than brushing it on but a bit messy.

Terranosaurus · 18-04-2009, 09:52

What are you doing that will need 4 tubes?

You just want polyurethane sealant - its all the same stuff, reardless of what it says on the label, Tiger seal, sikaflex etc.

How much can you get it for?

18-04-2009, 10:02

I would hazzard a guess he is cutting the bodywork and moving the wheel arches up.

or fitting land rover arches.

lacroupade · 19-04-2009, 00:26

Quote:

Originally Posted by Darwin

I would hazzard a guess he is cutting the bodywork and moving the wheel arches up.

or fitting land rover arches.

I've seen it today lads. What can I say. Bodywork? What bodywork? Theres bugger all left! LOL But it does looks the DBs...

extreme-4x4 · 19-04-2009, 21:03

Quote:

Originally Posted by lacroupade

I've seen it today lads. What can I say. Bodywork? What bodywork? Theres bugger all left! LOL But it does looks the DBs...

oh thats harsh pauly

na i only got a bit of patching up around the arches etc... make it waterproof again.... and fond a bit of rust under the plastic arch covers that id rather fix now and underseal , before the rust sets in

while im there im probably going to fit some cossy style vents to the bonnet and maybe some to the wings too.
just thought id buy 3-4 tubes while im there ya know

for when i find a good roof spoiler

ssteve · 19-04-2009, 21:20

Quote:

Originally Posted by extreme-4x4

where to buy
whats the best value

need about 4 tubes

(silicone size tubes)

oh underseal too i recon

no nails??

ssteve

lacroupade · 19-04-2009, 23:08

Quote:

Originally Posted by ssteve

no nails??

ssteve

well i told him to do it the old fashioned way like proper body repairers did - even offered him my old lead sink pipe and a blowtorch but he declined

18-04-2009, 00:03	#1
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	body panel adhesive ??? where to buy whats the best value need about 4 tubes (silicone size tubes) oh underseal too i recon

18-04-2009, 00:45	#2
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	What do you need to stick?

18-04-2009, 08:35	#4
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	i use either sikaflex or tiger seal.it comes in the tubes you put on a mastic gun.get mine from local cheapo wherehouse type shop as its quite pricey from the bodyshop consumables place. it also does underseal and shultz but you need a shultz gun and a compressor.did mine a couple of months ago with the shultz.used 2 ltr of the stuff.quicker than brushing it on but a bit messy.

18-04-2009, 09:52	#5
Terranosaurus Senior Member Join Date: Aug 2006 Location: YORKSHIRE Vehicle: 2001 2.7 TDi T2 SWB Posts: 4,077	What are you doing that will need 4 tubes? You just want polyurethane sealant - its all the same stuff, reardless of what it says on the label, Tiger seal, sikaflex etc. How much can you get it for?

18-04-2009, 10:02	#6
Darwin Guest Posts: n/a	I would hazzard a guess he is cutting the bodywork and moving the wheel arches up. or fitting land rover arches.