Newbie here

Dougieweld1987 · 13-08-2020, 00:57

Hello folks new here
Got a wee terrano an plan to make its a one off. Going to spend a lot of time on here any help and advice will be appreciated

Dougie

Blocky10 · 13-08-2020, 08:19

Hi and welcome Dougie.
Banshee has a modified swb 2.7 project thread.
There are a few mods you can do to a 3ltr engine. They are a little particular though so research well before hand.

solarman216 · 13-08-2020, 22:28

Hi mate and welcome, as blocky says there are a few mods you can do on the 3 lump, but follow the advice of the guys that have done them or you risk your engine, as for the vehicle what year is it? Rick

Dougieweld1987 · 15-08-2020, 00:56

Hi guys thanks for the replys
It's a swb 3.0l commercial 2006
It's only done 110000
I picked her up for 550 quid and it is by far the best motor iv had!
I'm a mobile welder and use it daily. My plan is to increase power a little jack her up and get some new rims and chunkys. Will add some pics of today's welding the rear Spring cup mount had broken off and was resting on the body. Going for a side exit tomorrow will put some pics up.

Blocky10 · 15-08-2020, 09:40

You'll definitely keep your welding skills honed with a terrano.

Look forward to seeing photos

I've given mine a 2" body lift which helps patching up the chassis

Banshee · 15-08-2020, 11:29

Quote:

Originally Posted by Dougieweld1987

Hi guys thanks for the replys
It's a swb 3.0l commercial 2006
It's only done 110000
I picked her up for 550 quid and it is by far the best motor iv had!
I'm a mobile welder and use it daily. My plan is to increase power a little jack her up and get some new rims and chunkys. Will add some pics of today's welding the rear Spring cup mount had broken off and was resting on the body. Going for a side exit tomorrow will put some pics up.

Welcome mate

As said above, I've got a bit of a fetish for these Terrano's and especially love a commercial, I've got 2 now

I've a 2004 2.7 in silver that's my daily and have also picked up a 3.0 56 plate in black recently that is getting a full rebuild and Waxoyl

I'd link you to the project threads but until you've joined as a full member you wont be able to see them

13-08-2020, 00:57	#1
Dougieweld1987 Junior Member Join Date: Aug 2020 Location: Scotland Vehicle: Nissan terrano 2 3.0l swb Posts: 2	Newbie here Hello folks new here Got a wee terrano an plan to make its a one off. Going to spend a lot of time on here any help and advice will be appreciated Dougie

13-08-2020, 22:28	#3
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,428	Hi mate and welcome, as blocky says there are a few mods you can do on the 3 lump, but follow the advice of the guys that have done them or you risk your engine, as for the vehicle what year is it? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

13-08-2020, 08:19	#2
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Hi and welcome Dougie. Banshee has a modified swb 2.7 project thread. There are a few mods you can do to a 3ltr engine. They are a little particular though so research well before hand.

15-08-2020, 00:56	#4
Dougieweld1987 Junior Member Join Date: Aug 2020 Location: Scotland Vehicle: Nissan terrano 2 3.0l swb Posts: 2	Hi guys thanks for the replys It's a swb 3.0l commercial 2006 It's only done 110000 I picked her up for 550 quid and it is by far the best motor iv had! I'm a mobile welder and use it daily. My plan is to increase power a little jack her up and get some new rims and chunkys. Will add some pics of today's welding the rear Spring cup mount had broken off and was resting on the body. Going for a side exit tomorrow will put some pics up.

15-08-2020, 09:40	#5
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	You'll definitely keep your welding skills honed with a terrano. Look forward to seeing photos I've given mine a 2" body lift which helps patching up the chassis