New Design for a Grease Gun that works every time.

macabethiel · 24-10-2017, 16:21

Okay you know how when you buy a tube of say Silicone Sealant or No Nails, you put the tube in the metal frame gun cut off the end bit, screw on the nozzle then cut to size. This seems to work really well with virtually no waste.

I would make a Grease Cartridge of exactly the same design with grease where the silicone is. You would then screw on the metal or hard plastic nozzle that would have a female grease gun end, with optional hoses. No mess and when the plunger reaches the end its empty.

You could make slightly less full cartridges for specialist greases. For high pressure applications you could even have a twin trigger arrangement, one for the cartridge and one for the final push into a secondary chamber or gas propulsion instead of the first trigger.

Another option pinch the vertical tube toothpaste design where gravity / suction or whatever pushes the toothpaste out.

Why is no one doing it should I ring Mr Dyson?

Jay666d · 24-10-2017, 22:31

Quote:

Originally Posted by macabethiel

Why is no one doing it should I ring Mr Dyson?

No, because then we'll be charged a fortune for it!

macabethiel · 25-10-2017, 07:38

Quote:

Originally Posted by Jay666d

No, because then we'll be charged a fortune for it!

But at least it would work when you want it to might try Gtek instead.lol

elty001 · 25-10-2017, 18:48

I've personally never had any problems with the old grease gun but I've seen young lads at work get covered in the stuff trying to re fill them

Need to keep them the same for entertainment value

solarman216 · 25-10-2017, 19:58

With you there Elty, old style guns cannot beat them, Rick

24-10-2017, 16:21	#1
macabethiel Senior Member Join Date: Aug 2008 Location: Derby Vehicle: Freelander & Jeep GC 3.0 Posts: 4,416	New Design for a Grease Gun that works every time. Okay you know how when you buy a tube of say Silicone Sealant or No Nails, you put the tube in the metal frame gun cut off the end bit, screw on the nozzle then cut to size. This seems to work really well with virtually no waste. I would make a Grease Cartridge of exactly the same design with grease where the silicone is. You would then screw on the metal or hard plastic nozzle that would have a female grease gun end, with optional hoses. No mess and when the plunger reaches the end its empty. You could make slightly less full cartridges for specialist greases. For high pressure applications you could even have a twin trigger arrangement, one for the cartridge and one for the final push into a secondary chamber or gas propulsion instead of the first trigger. Another option pinch the vertical tube toothpaste design where gravity / suction or whatever pushes the toothpaste out. Why is no one doing it should I ring Mr Dyson?

25-10-2017, 19:58	#5
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	With you there Elty, old style guns cannot beat them, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

25-10-2017, 18:48	#4
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	I've personally never had any problems with the old grease gun but I've seen young lads at work get covered in the stuff trying to re fill them Need to keep them the same for entertainment value