Patrol Pedders suspension kit and 35" wheels and tyres

[Mr K]

I'm selling my suspension set up and 16" steel wheels with 35" Maxxis Creepy crawler tyres.

Suspension is a Pedders 2 inch lift kit with long travel foam cell shocks and also Pedders steering damper. So 4 springs, heavy duty up front, standard in rear and 4 long travel shocks and a steering damper also. I'm not quite sure about the fitment of the steering damper to other trucks though thats the only thing as some had different mounts. Kit is in brilliant condition though, still fully coated in red paint which will confirm its condition.

Also black steel wheels, 16 inch with a -35 offset and 35x12.50x16 Maxxis Creepy crawlers. These tyres must have only done about 350 to 400 miles max and are also in great condition, wheels also have £100+ worth of balancing beads in them.

Pictures can be seen from my build thread here:http://www.nissan4x4ownersclub.com/f...ad.php?t=26453

Probably looking at something like £500 suspension and £500 wheels and tyres. Both are located in Stoke-on-Trent at the moment and replacements will be going on but until they come off obviously I can't release them, just getting feelers at the moment really but they are definitely for sale.

[Banshee]

Hmmmmmmmmm

Sent from my SM-G930F using Tapatalk

[Barrbeast]

I'm not sure if I'm going to go above 33s on the Y60 bud or I would have been interested in the 35s.

What you replacing the existing lift with? Bigger?

Re the steering damper yours should be fit Y60s and most y61s pre around 2003

[Jay666d]

Awesome price.

I was also looking into 35's for the future....

[Davey Boy]

Hi K
Sorry to hear your selling these, i'm sure you have your reasons.

I'm certainly seriously interested in the suspension!

1. To allow for the long travel shocks, did you have a body lift to?
2. You mentioned spring spacers in the build thread, are the springs not +2" ?

[britrb]

I want the suspension as well, for my 2002 GR.

Brian

[Jay666d]

Originally Posted by Davey Boy

Hi K
Sorry to hear your selling these, i'm sure you have your reasons.

I'm certainly seriously interested in the suspension!

1. To allow for the long travel shocks, did you have a body lift to?
2. You mentioned spring spacers in the build thread, are the springs not +2" ?

No need to lift the body for the long travel shocks.

The springs will be +2" and I assume the spaces give a little more lift again.

[Mr K]

Originally Posted by Davey Boy

Hi K
Sorry to hear your selling these, i'm sure you have your reasons.

I'm certainly seriously interested in the suspension!

1. To allow for the long travel shocks, did you have a body lift to?
2. You mentioned spring spacers in the build thread, are the springs not +2" ?

Hi Davey, don't worry I'm upgrading

Jay is right, the long travel shocks are 4 inch shocks and are part of this kit and go with the 2 inch springs, no body lift is needed, these were specced by pedders.

The spring spacers were just there to give a little bit more lift but I've decided to do it properly now to go with the new engine

[Barrbeast]

Originally Posted by Mr K

Hi Davey, don't worry I'm upgrading

Get in!

Is sir going for the full 4" now then?

[The Patrolman]

Originally Posted by Mr K

Hi Davey, don't worry I'm upgrading
The spring spacers were just there to give a little bit more lift but I've decided to do it properly now to go with the new engine

The new engine you say...

[Davey Boy]

Originally Posted by The Patrolman

The new engine you say...

Er ditto...... new engine??

[Barrbeast]

See build thread, headgasket went so he's fitting a skyline engine

[Mr K]

Originally Posted by Barrbeast

Get in!

Is sir going for the full 4" now then?

Nope

[Barrbeast]

Originally Posted by Mr K

Nope

What are you going for then bud?

[don simon]

Originally Posted by Mr K

Nope

Going the other way?