|
I'm new here, please be gentle This is where you can "introduce yourself". A chance for you as a new member to say hello and for you to tell us about yourselves, your truck and your other interests. |
|
Thread Tools | Display Modes |
13-01-2017, 23:12 | #1 |
Junior Member
Join Date: Jan 2017
Location: east
Vehicle: patrol
Posts: 3
|
New un!
Hi everybody, new here and looking for help.If what I have done upsets people please just say so.I have planted a sd33 engine in a 1956 chevy van, but a lot of the engine parts seem to be missing, like the throttle assembly. I was hoping that some one might have an engine that could be photod so I can see the layout?thanks in advance...
|
13-01-2017, 23:44 | #2 |
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
Hi and welcome, I have no knowledge of an sd33 engine but someone may be allong later who does, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
14-01-2017, 09:52 | #3 |
Senior Member
Join Date: Aug 2008
Location: Devizes Wiltshire
Vehicle: Nissan Note Ntec 1.5
Posts: 14,138
|
SD33
The SD33 is a 3.2 L (3,245 cc or 198.0 cu in) straight-six diesel engine, most known for its use in the Nissan Patrol MQ (160 series) from 1980-1983[4] and the Nissan C80. The SD33 produces 82 PS (60 kW) at 3,800 rpm. I can you photo how far you got, my be easier for someone to spot what's missing |
14-01-2017, 10:44 | #4 |
Junior Member
Join Date: Jan 2017
Location: east
Vehicle: patrol
Posts: 3
|
thanks, tis a six diesel,i have removed the transfer box to tun a 4 speed box from the output shaft, I bought the van as a project with the engine on a pallet, so am just putting itv all together now, so motor mounted,but struggling with the throttle assembly, seem to have to link the fuel rail lever to the butterfly valve on the inlet some how.Will try to post photo later..
|
14-01-2017, 11:10 | #5 |
Senior Member
Join Date: Aug 2008
Location: Devizes Wiltshire
Vehicle: Nissan Note Ntec 1.5
Posts: 14,138
|
Oh sorry, for got to say
welcome |
14-01-2017, 11:19 | #6 |
Junior Member
Join Date: Jan 2017
Location: east
Vehicle: patrol
Posts: 3
|
Thank you!
|
|
|