OK I give up

solarman216 · 07-01-2017, 21:41

As most of you will know I am a bit of an engine fan and also into very heavy transport, so been looking for how they transport the Wartsilla 14RTA96-C ship engine from factory to ship, it is 2300 tonnes over 100k hp and eats 250 tonnes of fuel a day, but I cannot find it, utube shows a pic of it on a transporter but as is often the case this is not featured in the vid when you click on it, can anyone more able than me help, thanks in advance, Rick

zippy656 · 07-01-2017, 21:50

https://m.youtube.com/watch?feature=...&v=jXHvY-zY9hA

This the one?

solarman216 · 07-01-2017, 21:55

Yes Zips that is the engine still in the factory and being test run, I want to see it being loaded on to transport for road delivery to the ship and loaded into the ship, Rick

zippy656 · 07-01-2017, 22:13

Quote:

Originally Posted by solarman216

Yes Zips that is the engine still in the factory and being test run, I want to see it being loaded on to transport for road delivery to the ship and loaded into the ship, Rick

Ok, will keep looking

Monaro Pete · 08-01-2017, 08:54

So we have an engine that uses around 282,000 litres of fuel a day & the government piss & moan about the carbon emissions of road vehicles

I wonder how the emissions of marine vessels compares to the road transport of the world.
I used to work off shore in the oil business & there's a lot traffic on the ocean.

zippy656 · 08-01-2017, 11:17

Quote:

Originally Posted by Monaro Pete

So we have an engine that uses around 282,000 litres of fuel a day & the government piss & moan about the carbon emissions of road vehicles

I wonder how the emissions of marine vessels compares to the road transport of the world.
I used to work off shore in the oil business & there's a lot traffic on the ocean.

what we use on the roads is a very small % of what is used by rail, marine and avation

zippy656 · 08-01-2017, 11:22

Quote:

Originally Posted by solarman216

Yes Zips that is the engine still in the factory and being test run, I want to see it being loaded on to transport for road delivery to the ship and loaded into the ship, Rick

http://www.bahreya.com/bb3/1/Marine%...%20Engines.pdf

no luck as yet

solarman216 · 08-01-2017, 13:13

I like the book Zips gonna take some time to read all that, Rick

emjaybee · 08-01-2017, 13:23

I would have thought that an engine that size wasn't transported at all. I'd have thought that it was either semi dismantled and then moved or built at a quayside location and partially dismantled and then rebuilt in the ship.

perelaar · 08-01-2017, 16:01

Yes - I don't think it is moved in one piece. Moved in more manageable pieces, and installed (might even be partially built) in place.

Lazy-Ferret · 08-01-2017, 16:16

You can see on some stills that it is loaded fully assembled onto a lorry, just can't find any videos of it.

Sent from my SM-G930F using Tapatalk

solarman216 · 08-01-2017, 17:50

This is what I would like to see but when you play the vid it just shows egine build in factory, https://i.ytimg.com/vi/w2rl1lsqxrM/h...SPTu51dqIDBKTs

zippy656 · 08-01-2017, 18:32

Quote:

Originally Posted by solarman216

I like the book Zips gonna take some time to read all that, Rick

Hoped so, thought you'd like it!

Also give me more time to find what your after !

solarman216 · 10-01-2017, 01:43

I now have to side with emjaybee & perelaar in that it would have to be dismantled into modular blocks for transport, utube as I have now discovered is full of scams ( only been looking for a short while) but now I am getting used to how it opperates many heavy moves are not real, but have found a couple that I think are genuine, and it follows my old rule of thumb that for instance a mobile crane that can lift say 100 tonnes will itself need to weigh around 100 tonnes, and having seen a 400 tonne load being moved and the overall total including prime movers was around 1100 tonnes, I cannot see a 4600 tonne vehicle moving any place on normal roads, shame on utube for that clearly photo shopped pic of the engine on a transporter, hunt off Zipps you will not find it, Rick

Blocky10 · 14-01-2017, 19:22

Found this
https://youtu.be/usjNUabqtbA

Not heavy haulage but heavy!
https://youtu.be/K9oApd3FbBI

07-01-2017, 21:41	#1
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	OK I give up As most of you will know I am a bit of an engine fan and also into very heavy transport, so been looking for how they transport the Wartsilla 14RTA96-C ship engine from factory to ship, it is 2300 tonnes over 100k hp and eats 250 tonnes of fuel a day, but I cannot find it, utube shows a pic of it on a transporter but as is often the case this is not featured in the vid when you click on it, can anyone more able than me help, thanks in advance, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

07-01-2017, 21:55	#3
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	Yes Zips that is the engine still in the factory and being test run, I want to see it being loaded on to transport for road delivery to the ship and loaded into the ship, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

08-01-2017, 13:13	#8
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	I like the book Zips gonna take some time to read all that, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

08-01-2017, 17:50	#12
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	This is what I would like to see but when you play the vid it just shows egine build in factory, https://i.ytimg.com/vi/w2rl1lsqxrM/h...SPTu51dqIDBKTs __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

10-01-2017, 01:43	#14
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	I now have to side with emjaybee & perelaar in that it would have to be dismantled into modular blocks for transport, utube as I have now discovered is full of scams ( only been looking for a short while) but now I am getting used to how it opperates many heavy moves are not real, but have found a couple that I think are genuine, and it follows my old rule of thumb that for instance a mobile crane that can lift say 100 tonnes will itself need to weigh around 100 tonnes, and having seen a 400 tonne load being moved and the overall total including prime movers was around 1100 tonnes, I cannot see a 4600 tonne vehicle moving any place on normal roads, shame on utube for that clearly photo shopped pic of the engine on a transporter, hunt off Zipps you will not find it, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

07-01-2017, 21:50	#2
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	https://m.youtube.com/watch?feature=...&v=jXHvY-zY9hA This the one?

08-01-2017, 08:54	#5
Monaro Pete Senior Member Join Date: Apr 2016 Location: Nr J28 M1 Vehicle: 03 Terrano 2.7 TDi Posts: 995	So we have an engine that uses around 282,000 litres of fuel a day & the government piss & moan about the carbon emissions of road vehicles I wonder how the emissions of marine vessels compares to the road transport of the world. I used to work off shore in the oil business & there's a lot traffic on the ocean.

08-01-2017, 13:23	#9
emjaybee Senior Member Join Date: Jul 2014 Location: Oxfordshire Vehicle: 3.0Di SVE '05 5 door. Posts: 1,536	I would have thought that an engine that size wasn't transported at all. I'd have thought that it was either semi dismantled and then moved or built at a quayside location and partially dismantled and then rebuilt in the ship.

08-01-2017, 16:01	#10
perelaar Senior Member Join Date: Sep 2014 Location: Belgium Vehicle: Terrano II 2.7TDi SWB '97 Posts: 802	Yes - I don't think it is moved in one piece. Moved in more manageable pieces, and installed (might even be partially built) in place.

08-01-2017, 16:16	#11
Lazy-Ferret Senior Member Join Date: Jun 2012 Location: Sevenoaks, Kent Vehicle: Terrano 2.7TDi SE Touring Posts: 5,221	You can see on some stills that it is loaded fully assembled onto a lorry, just can't find any videos of it. Sent from my SM-G930F using Tapatalk

14-01-2017, 19:22	#15
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Found this https://youtu.be/usjNUabqtbA Not heavy haulage but heavy! https://youtu.be/K9oApd3FbBI