Weller Chrome Steels

Banshee · 11-02-2015, 00:26

I've got another set of wheels with a near identical pattern to mine, they are slightly heavier though as they are chrome.

They are a bit scabby but when Powder Coated will look like mine as can be seen here

http://www.nissan4x4ownersclub.com/f...2&postcount=50

I'll get some pics up tomorrow

Looking for £50 collected

makeitfit · 11-02-2015, 01:18

I hadn't seen the pics of them on your truck before . They look good

AlexD333 · 11-02-2015, 07:33

Yes please, shotgun!!! Can I have first dibs!!!

Edit - as long as they have a good offset like in the pic.

Banshee · 11-02-2015, 10:47

Quote:

Originally Posted by AlexD333

Yes please, shotgun!!! Can I have first dibs!!!

Edit - as long as they have a good offset like in the pic.

Identical wheels mate, they are 15's and same offset

I'll get some pics up of them later tonight if I make it home in the light

They are a lot heavier and are chrome but have gone scabby, probably better nick than mine when I brought them but after a powdercoat they will look immense

SNH · 11-02-2015, 11:00

2nd dibs if Alex doesn't have them.

panelbeater · 11-02-2015, 11:04

do not want to put a downer on them but arnt the tyres supposed to be covered by the wheel arches in law for road use.

Banshee · 11-02-2015, 11:07

Quote:

Originally Posted by panelbeater

do not want to put a downer on them but arnt the tyres supposed to be covered by the wheel arches in law for road use.

Well the garage at my work said that they'd pass it for MOT so

panelbeater · 11-02-2015, 11:23

all good then.

makeitfit · 11-02-2015, 18:26

They'll pass an MOT but are not legal. If you get a know all plodmiester you'll get nicked. The "tread" must be covered , no worries on the wall though. A quick trim of a bit of UPVC screwed up to underside of the plastic wing trims will see you right. Spray to colour match or back to black. It can look very good and will cost you

Paff · 11-02-2015, 19:07

In theory the wheels/tyres should not protrude further than the wheel arches.

AlexD333 · 11-02-2015, 19:30

So what we doing old banshee old chap?

I need to pay you a visit I guess. Can you pm me your post code so I can cry a little.

And let me know your availability.

Lastly, you have an 04 terrano, these fit fine with the calipers ect?

AlexD333 · 11-02-2015, 19:30

Quote:

Originally Posted by Banshee

Well the garage at my work said that they'd pass it for MOT so

Let's face it, with the truck the way it is, I'm not fussed about that

makeitfit · 11-02-2015, 19:41

Quote:

Originally Posted by Paff

In theory the wheels/tyres should not protrude further than the wheel arches.

Nope, only the tread . The wheel and tyre-wall may protrude .

Banshee · 11-02-2015, 20:11

Quote:

Originally Posted by AlexD333

So what we doing old banshee old chap?

I need to pay you a visit I guess. Can you pm me your post code so I can cry a little.

And let me know your availability.

Lastly, you have an 04 terrano, these fit fine with the calipers ect?

Are you going to the May Weekend?

I could take them there for you ?

AlexD333 · 11-02-2015, 20:16

Quote:

Originally Posted by Banshee

Are you going to the May Weekend?

I could take them there for you ?

Pm me ur number dude, I'll give you a quick buzz

11-02-2015, 00:26	#1
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Weller Chrome Steels I've got another set of wheels with a near identical pattern to mine, they are slightly heavier though as they are chrome. They are a bit scabby but when Powder Coated will look like mine as can be seen here http://www.nissan4x4ownersclub.com/f...2&postcount=50 I'll get some pics up tomorrow Looking for £50 collected __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

11-02-2015, 01:18	#2
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	I hadn't seen the pics of them on your truck before . They look good

11-02-2015, 07:33	#3
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	Yes please, shotgun!!! Can I have first dibs!!! Edit - as long as they have a good offset like in the pic.

11-02-2015, 11:00	#5
SNH Senior Member Join Date: Sep 2014 Location: East Midlands Vehicle: Ford maverick Posts: 427	2nd dibs if Alex doesn't have them.

11-02-2015, 11:04	#6
panelbeater Senior Member Join Date: Dec 2012 Location: clacton on sea essex Vehicle: nissan terrano 2 2.7 tdi Posts: 1,638	do not want to put a downer on them but arnt the tyres supposed to be covered by the wheel arches in law for road use.

11-02-2015, 11:23	#8
panelbeater Senior Member Join Date: Dec 2012 Location: clacton on sea essex Vehicle: nissan terrano 2 2.7 tdi Posts: 1,638	all good then.

11-02-2015, 18:26	#9
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	They'll pass an MOT but are not legal. If you get a know all plodmiester you'll get nicked. The "tread" must be covered , no worries on the wall though. A quick trim of a bit of UPVC screwed up to underside of the plastic wing trims will see you right. Spray to colour match or back to black. It can look very good and will cost you

11-02-2015, 19:07	#10
Paff Senior Member Join Date: Apr 2014 Location: Just north of Ipswich, Suffolk Vehicle: Terrano II 2.7 SE+ Auto Posts: 1,094	In theory the wheels/tyres should not protrude further than the wheel arches.

11-02-2015, 19:30	#11
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	So what we doing old banshee old chap? I need to pay you a visit I guess. Can you pm me your post code so I can cry a little. And let me know your availability. Lastly, you have an 04 terrano, these fit fine with the calipers ect?