Wanted - Front N/S ABS Sensor Assembly

gerald of airedale · 01-07-2014, 12:15

All,
I have a 2000, Terrano 2 LWB the front N/S ABS sensor has taken a knock and now the ABS doesn't work, The light stays on too so it won't pass an MOT. Anyone breaking a T2 with one of these going please?

Thanks

dave123 · 01-07-2014, 12:27

Quote:

Originally Posted by gerald of airedale

All,
I have a 2000, Terrano 2 LWB the front N/S ABS sensor has taken a knock and now the ABS doesn't work, The light stays on too so it won't pass an MOT. Anyone breaking a T2 with one of these going please?

Thanks

you can't get them s/hand as they break when getting them out . I got mine from http://www.mister-auto.co.uk/en/abs-...5990_g412.html it number 4 and 5 on the list

Banshee · 01-07-2014, 13:40

Quote:

Originally Posted by gerald of airedale

All,
I have a 2000, Terrano 2 LWB the front N/S ABS sensor has taken a knock and now the ABS doesn't work, The light stays on too so it won't pass an MOT. Anyone breaking a T2 with one of these going please?

Thanks

Let me check to see if James has any in

Banshee · 01-07-2014, 16:23

James has one in £35 posted

dave123 · 01-07-2014, 16:39

Quote:

Originally Posted by Banshee

James has one in £35 posted

when I was looking for one second-hand a lot of people on here said don't buy them because they may have worked while in but 9/10 times they break while getting out . because they are so hard to get out

exosteve · 01-07-2014, 19:22

Try the wire bypass method first.
Its usually a broken wire giving the problem.
Replace the wire between the plug and sensor

gerald of airedale · 02-07-2014, 13:30

Quote:

Originally Posted by Banshee

James has one in £35 posted

That's brilliant! How do I contact James???

gerald of airedale · 02-07-2014, 13:32

Quote:

Originally Posted by exosteve

Try the wire bypass method first.
Its usually a broken wire giving the problem.
Replace the wire between the plug and sensor

Thanks for the advice. I'm afraid it's not a broken wire. Something has smacked the whole sensor and its sort of squashed The retaining bolt head has been sheared off by the force. Its going to be a pig to replace.

01-07-2014, 12:15	#1
gerald of airedale Junior Member Join Date: Dec 2010 Location: West Yorkshire Vehicle: Nissan Terrano II Posts: 27	Wanted - Front N/S ABS Sensor Assembly All, I have a 2000, Terrano 2 LWB the front N/S ABS sensor has taken a knock and now the ABS doesn't work, The light stays on too so it won't pass an MOT. Anyone breaking a T2 with one of these going please? Thanks

01-07-2014, 16:23	#4
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	James has one in £35 posted __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

01-07-2014, 19:22	#6
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	Try the wire bypass method first. Its usually a broken wire giving the problem. Replace the wire between the plug and sensor