Wifi & tablet probs

Sweety · 08-02-2014, 22:49

Could do with some tech help, got a versus touchtab 7 tablet yes I know nothing flash but it was free when my wife got her phone

now it worked fine on the old O2 router but we changed to BT just after Xmas & got the latest home hub 5 router. Now the prob is the tablet won't connect to the hub 5 at all well it did for one night & all I keep getting is out of range even right next to the hub 5. All 3 laptops & phones connected no probs so I tried the factory reset on the tablet & still no joy.
Anyone got any ideas on how to solve it

clivvy · 08-02-2014, 23:31

what security is setup on the wireless and what is it set to - 2.4 or 5Ghz? Also, what channel is it on, or is it auto? It is possibly an incompatibility, but I would check the above first, certainly try changing the channel at least...

kitchenman · 09-02-2014, 01:45

Could be the new router is N which the tablet cant see.

I had that problem with the virgin superhub

clivvy · 09-02-2014, 10:55

Quote:

Originally Posted by kitchenman

Could be the new router is N which the tablet cant see.

I had that problem with the virgin superhub

exactly, if its defaulted to 5ghz (N) then some devices will struggle. Also, if its set to "auto", this wont help either (like you, I had the same issue and had to set it to b&g only".

Sweety · 09-02-2014, 22:40

Quote:

Originally Posted by clivvy

exactly, if its defaulted to 5ghz (N) then some devices will struggle. Also, if its set to "auto", this wont help either (like you, I had the same issue and had to set it to b&g only".

I think it might be set to 5Ghz which I think is the factory setting

I know there was a desk top control you could down load off BT's site but can't find it now

Had hell with BT getting it installed as the idiots had installed the master socket in the bathroom & wanted £200 to move it

first engineer refused to do the install so had to wait even longer then theres the bills like trying to charge us for 2 routers & stuff we don't have or want

TBH i'm no good with computers as you can't fix them with a hammer

Cheers for the help & will look into these things mentioned

Ogri · 10-02-2014, 00:36

There's a free Android app called wifi analyzer that will give you lots of information about your (and your neighbours), wifi that may help you to work out what's going on

Banshee · 10-02-2014, 15:36

To switch from 5GHz (N) to 2.4GHz (G) you'll need to access your routers web console, it will be under the Wi-Fi section. To find out your routers address you'll need to open a command prompt window and type "ipconfig" the address you'll want is the "Default Gateway" address under the section for your WiFi card addresses

Put this IP into your web browser and then enter the username and password to gain access to the router, these should be stamped onto the sticker that comes on the bottom of your router that provides your encryption key

Switch to 2.4GHz and restart the router and the network should then be visible from your tablet

gibby · 10-02-2014, 16:07

all i do if i want to change anything on my BT hub is type bthomehub into the address bar and it goes straight into the hubs settings page..

08-02-2014, 22:49	#1
Sweety Senior Member Join Date: May 2013 Location: Northumberland Vehicle: Terrano 2.7TDI SE LWB Posts: 3,604	Wifi & tablet probs Could do with some tech help, got a versus touchtab 7 tablet yes I know nothing flash but it was free when my wife got her phone now it worked fine on the old O2 router but we changed to BT just after Xmas & got the latest home hub 5 router. Now the prob is the tablet won't connect to the hub 5 at all well it did for one night & all I keep getting is out of range even right next to the hub 5. All 3 laptops & phones connected no probs so I tried the factory reset on the tablet & still no joy. Anyone got any ideas on how to solve it

10-02-2014, 15:36	#7
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	To switch from 5GHz (N) to 2.4GHz (G) you'll need to access your routers web console, it will be under the Wi-Fi section. To find out your routers address you'll need to open a command prompt window and type "ipconfig" the address you'll want is the "Default Gateway" address under the section for your WiFi card addresses Put this IP into your web browser and then enter the username and password to gain access to the router, these should be stamped onto the sticker that comes on the bottom of your router that provides your encryption key Switch to 2.4GHz and restart the router and the network should then be visible from your tablet __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

08-02-2014, 23:31	#2
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	what security is setup on the wireless and what is it set to - 2.4 or 5Ghz? Also, what channel is it on, or is it auto? It is possibly an incompatibility, but I would check the above first, certainly try changing the channel at least...

09-02-2014, 01:45	#3
kitchenman Senior Member Join Date: Jan 2011 Location: Essex Wescliff Vehicle: maverick 1994 2.7 TD Posts: 1,278	Could be the new router is N which the tablet cant see. I had that problem with the virgin superhub

10-02-2014, 00:36	#6
Ogri Senior Member Join Date: Feb 2007 Location: Staffordshire Vehicle: 2004 Terrano 2.7 Td SE Posts: 324	There's a free Android app called wifi analyzer that will give you lots of information about your (and your neighbours), wifi that may help you to work out what's going on

10-02-2014, 16:07	#8
gibby Junior Member Join Date: Nov 2013 Location: telford shropshire Vehicle: ford maverick 2.7td 97 Posts: 22	all i do if i want to change anything on my BT hub is type bthomehub into the address bar and it goes straight into the hubs settings page..