Clutch Pedal Bush

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ordered mine, should be here any day. It's going to be high on my list of "to do" jobs when I get back to Spain shortly. My clutch pedal is ok at the mo, but I don't see any point in waiting until the plastic one fails, as it appears it probably will! Nice one Jim!
Bruce (Terranical)
 
Bush

Just bought one of these , fitted it the other day, bit tight in the bore so just cleaned it out a bit with some fine emery paper, greased it up and put it all back together.

Made no difference !!!

So, could it be a problem with the return spring ?
 
rickydicky said:
Just bought one of these , fitted it the other day, bit tight in the bore so just cleaned it out a bit with some fine emery paper, greased it up and put it all back together.

Made no difference !!!

So, could it be a problem with the return spring ?
Click to expand...

Had same, just opened it up a fraction, so pin would pass right through, and to start with thought it was fixed, but on the drive across here to Wales it started doing it again.

Did see a post where the adjusting nut had come loose, so that will be my next port of call as I have already had the spring out and checked it.
 
Fitted mine, no problems so far... No sticking pedal and returns every time.
 
Just returned from a caravanning holiday to Arisaig with the new bush fitted, only did about 800 miles but the clutch pedal has been faultless. :thumbs


Mick
 
I know I'm being lazy, bet there already is a thread with piccies! Has anyone got photo's showing where this wee gem sits and how to pop out the worn old bush :naughty and replace with the shiny new one?
 
Your right, there is a thread with pictures ;) search function is brilliant here! Lol
 
I got an email from Jims mate asking if I had had problems with the bush, I found it a tad tight to get it onto the pin the 1st time, but once on, it moved freely and came off again easy.
I have found the pedal now works fine, my mate want's one now.
 
Lazy-Ferret said:
Had same, just opened it up a fraction, so pin would pass right through, and to start with thought it was fixed, but on the drive across here to Wales it started doing it again.

Did see a post where the adjusting nut had come loose, so that will be my next port of call as I have already had the spring out and checked it.
Click to expand...

Sorted !

The rod that goes into the Clutch Slave cylinder , the other end which connects to the
clutch pedal where the bush is fitted (following me so far ?), had moved up its thread where I had been fiddling about over the last couple of weeks. So I wound the thread out a bit, and hey presto , pedal returning.

Hope that makes sense .
 
rickydicky said:
Sorted !

The rod that goes into the Clutch Slave cylinder , the other end which connects to the
clutch pedal where the bush is fitted (following me so far ?), had moved up its thread where I had been fiddling about over the last couple of weeks. So I wound the thread out a bit, and hey presto , pedal returning.

Hope that makes sense .
Click to expand...

Clear as mud :augie:augie

I understand what your saying...honest ;);)
 
Is there 2 to replace or just the one ? Thanks
 
Are these still available? Nothing is coming up on the website link.
 
I thought that they were no longer available.I got mine just before i heard that they were not making anymore.
 
You must log in or register to reply here.

Similar threads

G
Maverick/Terrano Clutch Pedal Lever Removal
Replies
3
Views
80
jims-terrano
J
TONUP
New Clutch Master Cylinder & Clutch Pedal Bush - Terrano 2
Replies
11
Views
207
reetp
R
Q
Clutch Pedal Bush
Replies
7
Views
122
quixote
Q
J
rusty trusty the Terrano
Replies
18
Views
259
jonny
J
Terranical
Clutch pedal bush
Replies
10
Views
4K
quixote
Q

Latest posts

Back
Top