my terrano

[jayjay1990]

this is when i firts got it


lift done

tyres on

[Adz]

Thats a monster bumper

[melissachels]

what size r those tyres? n what mods did u need 2 do 2 get them in there?

[Adz]

Originally Posted by melissachels

what size r those tyres? n what mods did u need 2 do 2 get them in there?

terrano 2 SR 2.7TDI

33/12.50.15 mud tyres
2" body lift
2" lift on torsion bars
3" rear suspention lift (lift springs plus 1" spacers)
custom front winchbumper and winch
2"plus rear shocks
std lenth gas front shocks
cb radio
im sure theres more but cant remember

but loads im doing in the next month or so will keep you updated

[jayjay1990]

Originally Posted by Adz

Thats a monster bumper

lol its still a wirk in progress

[melissachels]

Originally Posted by Adz

terrano 2 SR 2.7TDI

33/12.50.15 mud tyres
2" body lift
2" lift on torsion bars
3" rear suspention lift (lift springs plus 1" spacers)
custom front winchbumper and winch
2"plus rear shocks
std lenth gas front shocks
cb radio
im sure theres more but cant remember

but loads im doing in the next month or so will keep you updated

did u neede 2 do all them? i just wanna get bigger tyres at the mo, can't afford anything else atm

[jayjay1990]

Originally Posted by melissachels

did u neede 2 do all them? i just wanna get bigger tyres at the mo, can't afford anything else atm

i would say to fit 33s on you need a 2inch body lift
and 2inch susspention lift at least unless you cut the arches
31s fit standard you just need to remove the mudflaps and wind torsion bar up

[melissachels]

Originally Posted by jayjay1990

i would say to fit 33s on you need a 2inch body lift
and 2inch susspention lift at least unless you cut the arches
31s fit standard you just need to remove the mudflaps and wind torsion bar up

that with spacers (spec)? cheers much feel like such a div at times but i new 2 the lifting cars n making them higher not lower

[jayjay1990]

Originally Posted by melissachels

that with spacers (spec)? cheers much feel like such a div at times but i new 2 the lifting cars n making them higher not lower

spacers or lift springs i have both on the rear of mine as it used to still catch so i added an extra inch spacer

[jayjay1990]

heres my old maverick it had lwb rear springs and torsion bar wound up
and 30/9.50.15 tyres on it was a brilliant truck

[jayjay1990]

the tree sliders was allready on by the way

[melissachels]

How was that after bein tipped?

What size spacers n what best make prob 31's i'm getting

[762buzz]

how on earth did u end up wrong way up on that hole

looks drastic just to check for rust lol

[firebobby]

Your just showing off now, were you trying to get those land rover driver jealous...look what my Nissan can do

[makeitfit]

Quality parking there mate used to check my under-carriage that way too
33s will fit with EITHER a 2" susp lift OR body lift. Much easier with both though as it's easier on wheel choice. 2" suspension lift and good offset wheels and 33s fit if no mud flaps and plastic bumper etc
Loving the bumper work, top job, but have you done much road work with it, as I'd say it's choked the air flow a bit.
Keep it up