Go Back   :::.Nissan 4x4 Owners Club.::: > General > I'm new here, please be gentle

I'm new here, please be gentle This is where you can "introduce yourself". A chance for you as a new member to say hello and for you to tell us about yourselves, your truck and your other interests.

Reply
 
Thread Tools Display Modes
Old 23-03-2018, 21:59   #1
Graemebarson
Junior Member
Click here to find out how to become a paid up member
 
Join Date: Mar 2018
Location: Scotland
Vehicle: Nissan Terrano II
Posts: 2
Default New member with a rumbling terano

Hi guys,
i have just been given a Terrano II 52 plate 2.7 Diesel
it is in not to bad a condition for it's age but i have a problem
i would like some help with please.

When driving normally the terrano is great but as soon as i hit 50 mph it rumbles loudly until 60mph then it goes quiet but still faint. And my wife says it is vibrating her side of the car but i can't feel any vibration on my side

Now i am not very mechanically minded but i have a couple of things i think it may be for instance, could it be the tyres? the prop shaft? the tracking/Balancing? or is it something more sinister that i should be worried about.
any help/info with this would be great thanks.

Graeme.
Graemebarson is offline   Reply With Quote
Old 23-03-2018, 22:05   #2
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

Welcome aboard and you’ve joined the right place.

First job get your wheels checked including balancing.

Second thing would be the front propshaft, you should be able to reach it without jacking car up. It has two UJs and a single sliding joint. If you can grab the front propshaft, give it a good tug to see if you feel a really small amount of movement the chances are it would be sliding joint which cannot be replaced it would mean a replacement shaft but these are cheap enough second hand. UJs do fail and can be replaced.

That’ll give you something to be going on with.
jims-terrano is offline   Reply With Quote
Old 23-03-2018, 22:09   #3
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,428
Default

Welcome mate as Jim says you have fixed hubs I think so front prop and diff are turning all the time on the road, means that the prop gets dry of grease over time and starts to wear, on top of that they stopped putting greasers on them, so yes first place to look, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 23-03-2018, 22:22   #4
Graemebarson
Junior Member
Click here to find out how to become a paid up member
 
Join Date: Mar 2018
Location: Scotland
Vehicle: Nissan Terrano II
Posts: 2
Default

Thanks for the quick replies guys.

To be honest i know the tracking is out as the steering wheel is not centred when driving straight, holding the wheel at 10 to 2 the car goes to the right but turning the wheel and hands at quarter to 1 the car drives straight but i don't think it should cause as much rumbling as it does or could i be wrong??
Graemebarson is offline   Reply With Quote
Old 23-03-2018, 22:32   #5
jonny
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2018
Location: Cheshire
Vehicle: Terrano
Posts: 198
Default

Welcome
jonny is offline   Reply With Quote
Old 23-03-2018, 23:16   #6
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,428
Default

Quote:
Originally Posted by Graemebarson View Post
Thanks for the quick replies guys.

To be honest i know the tracking is out as the steering wheel is not centred when driving straight, holding the wheel at 10 to 2 the car goes to the right but turning the wheel and hands at quarter to 1 the car drives straight but i don't think it should cause as much rumbling as it does or could i be wrong??
Cos wheel is out does not mean tracking is out, just not been centered when tracking done, but would not cause your probs anyway, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 23-03-2018, 23:44   #7
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

Tracking is also different to having the wheels balanced and also any damage to a wheel or tyre. Move the front wheels to the back and the back to the front. This may change or remove the vibration if it is balance or damage related to the wheels or tyres.
jims-terrano is offline   Reply With Quote
Old 24-03-2018, 14:13   #8
macabethiel
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2008
Location: Derby
Vehicle: Freelander & Jeep GC 3.0
Posts: 4,416
Thumbs up The Palm Test

Quote:
Originally Posted by Graemebarson View Post
Thanks for the quick replies guys.

To be honest i know the tracking is out as the steering wheel is not centred when driving straight, holding the wheel at 10 to 2 the car goes to the right but turning the wheel and hands at quarter to 1 the car drives straight but i don't think it should cause as much rumbling as it does or could i be wrong??
If the tracking is out you will get feathering on your tyres, plus if its way out track possibly a steering pull try the "Palm Test". Many newer left hand drive cars are built with a slight tendency to pull to the nearside for safety reasons.

With your fingers straight,held together,your thumb against your first finger so you have the full flat of your hand extended by your fingers you are ready to do the"Palm Test"

If you push the flat of your now extended hand so the finger tips are against the outer edge of the tyre push your hand across the width on the tyre so it is at right angles to the wheel. As you push your palm across the tyre you then pull it back again. If you feel a "File Effect" in either direction then your tracking is out. If the tread feels smooth in both directions your tracking is okay. This works on all cars whatever the make or model there should be no "file effect".
This test cannot be used on a brand new tyres wait until they have done a hundred miles or so. This is to eliminate the moulding effect on some new tyre casings

The file effect is what you feel if you run a finger across a metal file. In one direction it will be smooth in the other you will feel the abrasion of the file.
macabethiel is offline   Reply With Quote
Old 24-03-2018, 15:42   #9
Lazy-Ferret
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2012
Location: Sevenoaks, Kent
Vehicle: Terrano 2.7TDi SE Touring
Posts: 5,221
Default

Quote:
Originally Posted by jims-terrano View Post
Welcome aboard and you’ve joined the right place.

First job get your wheels checked including balancing.

Second thing would be the front propshaft, you should be able to reach it without jacking car up. It has two UJs and a single sliding joint. If you can grab the front propshaft, give it a good tug to see if you feel a really small amount of movement the chances are it would be sliding joint which cannot be replaced it would mean a replacement shaft but these are cheap enough second hand. UJs do fail and can be replaced.

That’ll give you something to be going on with.
I am reporting you to the Mods... that is a sizeist comment... even with a 2 inch suspension and 2 inch body lift, I can't do that....

Off to start eating only lettuce..
Lazy-Ferret is online now   Reply With Quote
Old 24-03-2018, 16:49   #10
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

Quote:
Originally Posted by Lazy-Ferret View Post
I am reporting you to the Mods... that is a sizeist comment... even with a 2 inch suspension and 2 inch body lift, I can't do that....

Off to start eating only lettuce..
Yeah but what you’re forgetting is my knuckles drag on the floor whilst I’m walking
jims-terrano is offline   Reply With Quote
Old 25-03-2018, 11:14   #11
Banshee
Moderator
 
Banshee's Avatar
 
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
Default

Quote:
Originally Posted by Lazy-Ferret View Post
I am reporting you to the Mods... that is a sizeist comment... even with a 2 inch suspension and 2 inch body lift, I can't do that....

Off to start eating only lettuce..
__________________
Moderator

04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread
Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job
Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank
TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger
Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter


99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread
Engine Transplant - In Progress!!!
Banshee is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 14:48.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Images online photo albums