Wiper spindle bushes

Detectingdorset · 20-02-2018, 07:02

Hello all,
I have a bit of a problem, my wiper spindle bushes are so worn that every time I close my bonnet (hood) the wiper arm gets trapped under the edge of the Bonnet.
can you get replacement bushes??
Thanks

solarman216 · 20-02-2018, 09:43

yes the three bolt assembly is replaceable but no idea of cost from the stealers, I have always got them off of a scrapper, Rick

macabethiel · 20-02-2018, 11:11

I am pretty sure they are quite expensive. I bought some for a Carlton twenty years ago and they were over a £100 back then!

A used pair is going to be the sensible option.

terranosaurusdoug · 20-02-2018, 13:08

Best bet is to get a complete linkage from a scrapped motor!

perelaar · 20-02-2018, 13:14

The linkage on my T2 has been held together with zip ties for the past 1,5 years - no issues since, and that in rainy Belgium

terranosaurusdoug · 20-02-2018, 13:57

Quote:

Originally Posted by perelaar

The linkage on my T2 has been held together with zip ties for the past 1,5 years - no issues since, and that in rainy Belgium

I like your style

perelaar · 20-02-2018, 18:55

A car made from zip ties would be the thing, completely rustproof and indestructible

terranosaurusdoug · 20-02-2018, 20:06

Quote:

Originally Posted by perelaar

A car made from zip ties would be the thing, completely rustproof and indestructible

And easy to find parts for

jonny · 20-02-2018, 20:25

don't forget the duct tape...

terranosaurusdoug · 20-02-2018, 20:50

Gorrila tape is good stuff

20-02-2018, 07:02	#1
Detectingdorset Junior Member Join Date: Feb 2018 Location: Dorchester Dorest Vehicle: 1993 terrano II 2'7 tdi Posts: 1	Wiper spindle bushes Hello all, I have a bit of a problem, my wiper spindle bushes are so worn that every time I close my bonnet (hood) the wiper arm gets trapped under the edge of the Bonnet. can you get replacement bushes?? Thanks

20-02-2018, 09:43	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,428	yes the three bolt assembly is replaceable but no idea of cost from the stealers, I have always got them off of a scrapper, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

20-02-2018, 11:11	#3
macabethiel Senior Member Join Date: Aug 2008 Location: Derby Vehicle: Freelander & Jeep GC 3.0 Posts: 4,416	I am pretty sure they are quite expensive. I bought some for a Carlton twenty years ago and they were over a £100 back then! A used pair is going to be the sensible option.

20-02-2018, 13:08	#4
terranosaurusdoug Senior Member Join Date: Sep 2014 Location: Yorkshire, J33 M62 Vehicle: 2000 Terrano lwb 2.7TDI Posts: 5,500	Best bet is to get a complete linkage from a scrapped motor!

20-02-2018, 13:14	#5
perelaar Senior Member Join Date: Sep 2014 Location: Belgium Vehicle: Terrano II 2.7TDi SWB '97 Posts: 802	The linkage on my T2 has been held together with zip ties for the past 1,5 years - no issues since, and that in rainy Belgium

20-02-2018, 18:55	#7
perelaar Senior Member Join Date: Sep 2014 Location: Belgium Vehicle: Terrano II 2.7TDi SWB '97 Posts: 802	A car made from zip ties would be the thing, completely rustproof and indestructible

20-02-2018, 20:25	#9
jonny Senior Member Join Date: Jan 2018 Location: Cheshire Vehicle: Terrano Posts: 198	don't forget the duct tape...

20-02-2018, 20:50	#10
terranosaurusdoug Senior Member Join Date: Sep 2014 Location: Yorkshire, J33 M62 Vehicle: 2000 Terrano lwb 2.7TDI Posts: 5,500	Gorrila tape is good stuff