Wanted drag link

ceny · 01-11-2016, 16:51

Hi,

The Terrano is in for MOT and needs a few bits to get it through. The main one being Drag Link, but also both front callipers. Is anyone breaking a beast that can help?

1996 Terrano 2 2.7l

Thanks

perelaar · 01-11-2016, 18:35

Drag link no point second hand, just get new ones from Milner's or any other part supplier.

Calipers: what's wrong with them? Could just be a case of seized slide pins, can be fixed with elbow grease and light sandpaper. Just have a search here on the forum and the workshop downloads.

ceny · 01-11-2016, 19:30

Yep seen a drag link online.

callipers are gone, one has a rusted piston, beyond repair. The other is as bad.

Cheers

jims-terrano · 01-11-2016, 20:26

Think if I remember right from last year recon calipers from Andrew Pages were around £80 to £90. For some reason one was more expensive than the other.

Banshee · 01-11-2016, 20:50

You after the carriers as well?

ceny · 01-11-2016, 22:21

I would have to check tomorrow. The problem is with the pistons I have been told, but depending on the price if any available I would take all.

Thanks

01-11-2016, 16:51	#1
ceny Member Join Date: Jun 2016 Location: Lincolnshire Vehicle: Terrano 11 TDI S Posts: 37	Wanted drag link Hi, The Terrano is in for MOT and needs a few bits to get it through. The main one being Drag Link, but also both front callipers. Is anyone breaking a beast that can help? 1996 Terrano 2 2.7l Thanks

01-11-2016, 19:30	#3
ceny Member Join Date: Jun 2016 Location: Lincolnshire Vehicle: Terrano 11 TDI S Posts: 37	drag link Yep seen a drag link online. callipers are gone, one has a rusted piston, beyond repair. The other is as bad. Cheers

01-11-2016, 20:50	#5
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	You after the carriers as well? __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

01-11-2016, 22:21	#6
ceny Member Join Date: Jun 2016 Location: Lincolnshire Vehicle: Terrano 11 TDI S Posts: 37	breaks I would have to check tomorrow. The problem is with the pistons I have been told, but depending on the price if any available I would take all. Thanks

01-11-2016, 18:35	#2
perelaar Senior Member Join Date: Sep 2014 Location: Belgium Vehicle: Terrano II 2.7TDi SWB '97 Posts: 802	Drag link no point second hand, just get new ones from Milner's or any other part supplier. Calipers: what's wrong with them? Could just be a case of seized slide pins, can be fixed with elbow grease and light sandpaper. Just have a search here on the forum and the workshop downloads.

01-11-2016, 20:26	#4
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Think if I remember right from last year recon calipers from Andrew Pages were around £80 to £90. For some reason one was more expensive than the other.